Operating Instructions
Useful Information
41
Changing the base unit PIN (Personal Identification Number)
Important:
L If you change the PIN, please make note of your new PIN. The unit will not reveal
the PIN to you. If you forget your PIN, contact an authorised service centre.
1 {j/OK}
2 {V}/{^}: “Base Unit Setup” i {j/OK}
3 {V}/{^}: “Base Unit PIN” i {j/OK}
4 Enter the current 4-digit base unit PIN (default: “0000”).
5 Enter the new 4-digit base unit PIN. i {j/OK} i {ic}
Wall mounting
Note:
L Make sure that the wall is strong enough to support the weight of the unit.
■ Base unit ■ Charger
Hook
Screws
(Not supplied)
30 mm
Hooks
25 mm
Screws
(Not supplied)
TG2511_21FX(e).book Page 41 Tuesday, February 2, 2010 3:08 PM