Operating instructions

Programming

For assistance, please visit http://www.panasonic.com/phonehelp 31

*1 If you subscribe to Caller ID service and want to view the caller’s information after lifting

up the handset to answer a call, turn off this feature.

*2 KX-TG2622

*3 This tone lets you know when you receive a call while you are on an intercom call. If you

select “On”, the tone sounds repeatedly for as long as the line rings. If you select “2”, the

tone only sounds 2 times. (KX-TG2622)

*4 You can select whether or not key tones are heard when keys are pressed. Includes

confirmation tones and error tones.

*5 If you subscribe to a distinctive ring service (such as IDENTA-RING), select a tone

(tone 1 to 3). If you select a melody, you cannot distinguish lines by their ringers.

*6 The flash time depends on your telephone exchange or host PBX. Consult your PBX

supplier if necessary. The setting should stay at “700ms” unless pressing {Flash} fails

to pick up the call waiting call.

*7 Generally, the line mode setting should not be adjusted. If “Line in use” is not

displayed when another phone connected to the same line is in use, you need to

change the line mode to “A”.

Customer support

The handset can display the Internet address where you can download the operating

instructions or get further information for this product using your computer.

{MENU} i “Customer support” i {Select} i {OFF}

Set flash time

{0}{5}{2}{1}: <700ms> {2}: 600ms

{3}: 400ms {4}: 300ms

{5}: 250ms {6}: 110ms

{7}: 100ms {8}: 90ms

Set line mode

{0}{5}{3}{1}: A {2}: <B> r

Store VM access# {0}{7}{1} Go to step 2 on page 32. r

V.M. access {3} Go to step 2 on page 33. –

VM tone detect {0}{7}{2}{1}: <On> {0}: Off r

Voice enhancer {5}{1}: On {0}: <Off>–

Feature Feature

code

Setting code System

setting

TG2620_2621_2622.book Page 31 Monday, December 26, 2005 1:48 PM