Operating Instructions

Problem Cause/solution
I cannot hear a dial tone. R Make sure that you are using the supplied telephone line cord.
Y
our old telephone line cord may have a different wiring
configuration.
R The base unit’s AC adaptor or telephone line cord is not
connected. Check the connections.
R Disconnect the base unit from the telephone line and connect
the line to a known working telephone. If the working
telephone operates properly, contact our service personnel to
have the unit repaired. If the working telephone does not
operate properly, contact your service provider/telephone
company.
I cannot use the intercom
or
phonebook copy feature.
R These features are available between the handsets. Although
the handset displays “Intercom”, “Copy All”, or “Copy”,
these features are not available for single handset models.
Programmable settings
Problem Cause/solution
The display is in a
la
nguage I cannot read.
R Change the display language (page 14).
I cannot activate the eco
mo
de.
R You cannot set eco mode when you set the repeater mode
“On”. If required, set the repeater mode to “Off” (page 22).
I cannot remember the
PI
N.
R Change the PIN using the following method.
1 M
N
2 MbN: “B
ase Unit Setup” a M
N
3 MbN: “B
ase Unit PIN” a M
N
4 *7
000
5 Enter the new 4-digit base unit PIN. a M
N a
M
N
Battery recharge
Problem Cause/solution
The handset beeps and/or
flashes.
R Battery charge is low. Fully charge the batteries (page 11).
I
fully charged the
ba
tteries, but
–
still flashes or
– t
he operating time
seems to be shorter.
R C
lean the battery ends (
, ) and the charge contacts with
a
dry cloth and charge again.
R It is time to replace the batteries (page 11).
36
Helpline Tel. No.: U.K. 0844 844 3899 Ireland 01289 8333
Useful Information
TG27xxE(en)_0801_ver110.pdf 36 2014/08/01 15:31:47