TG5451_5452_5453.book Page 1 Friday, February 18, 2005 11:38 AM Operating Instructions 5.8 GHz Digital Cordless Answering System Model No. KX-TG5451 5.8 GHz Digital Cordless Answering System with Dual Handsets Model No. Model shown is KX-TG5451. KX-TG5452 5.8 GHz Digital Cordless Answering System with Three Handsets Model No. KX-TG5453 This unit is compatible with Caller ID. To use this feature, you must subscribe to the appropriate service offered by your service provider.
TG5451_5452_5453.book Page 2 Friday, February 18, 2005 11:38 AM Table of Contents Introduction Your phone . . . . . . . . . . . . . . . . . . . . 4 Accessory information . . . . . . . . . . . . . . 5 Important safety instructions . . . . . . . . . 6 For best performance . . . . . . . . . . . . . . . 8 Preparation Connections . . . . . . . . . . . . . . . . . . . . . . 9 Battery installation . . . . . . . . . . . . . . . . 10 Battery charge . . . . . . . . . . . . . . . . . . . 11 Battery replacement . .
TG5451_5452_5453.book Page 3 Friday, February 18, 2005 11:38 AM Table of Contents Programming via direct commands . . . 45 Direct commands chart . . . . . . . . . . 45 Answering System Features Answering system . . . . . . . . . . . . . . . . 47 Recording your greeting message . . . . 47 Erasing your greeting message . . . 48 Pre-recorded greeting message . . . 48 Turning the answering system on/off . . 48 Screening your calls . . . . . . . . . . . . 48 Listening to messages . . . . . . . . . . . . .
TG5451_5452_5453.book Page 4 Friday, February 18, 2005 11:38 AM Introduction Thank you for purchasing a Panasonic cordless telephone. We recommend keeping a record of the following information for future reference. Serial No. (found on the bottom of the unit) Date of purchase Name and address of dealer Attach your purchase receipt here. Energy Star: As an ENERGY STAR® Participant, Panasonic has determined that this product meets the ENERGY STAR guidelines for energy efficiency. ENERGY STAR is a U.S.
TG5451_5452_5453.book Page 5 Friday, February 18, 2005 11:38 AM Introduction Accessory information Included accessories To order replacement accessories, call 1-800-332-5368. TTY users (hearing or speech impaired users) can call 1-866-605-1277. No.
TG5451_5452_5453.book Page 6 Friday, February 18, 2005 11:38 AM Introduction Important safety instructions When using this unit, basic safety precautions should always be followed to reduce the risk of fire, electric shock, or personal injury. 1. Read and understand all instructions. 2. Follow all warnings and instructions marked on this unit. 3. Unplug this unit from power outlets before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning. 4.
TG5451_5452_5453.book Page 7 Friday, February 18, 2005 11:38 AM Introduction L Do not touch the plug with wet hands. L The AC adaptor is used as the main disconnect device. Ensure that the AC outlet is installed near the unit and is easily accessible. Battery To reduce the risk of fire or injury to persons, read and follow these instructions. L Use only the battery(ies) specified. L Do not dispose of the battery(ies) in a fire. They may explode.
TG5451_5452_5453.book Page 8 Friday, February 18, 2005 11:38 AM Introduction For best performance Base unit location/noise The base unit and handset use radio waves to communicate with each other. For maximum distance and noise-free operation, we recommend the following: L Placing the unit away from electrical appliances such as a TV, personal computer or another cordless phone. L Placing the base unit in a HIGH and CENTRAL location with no obstructions such as walls. L Raising the antennas vertically.
TG5451_5452_5453.book Page 9 Friday, February 18, 2005 11:38 AM Preparation Connections Base unit Fasten the AC adaptor cord. Raise the antennas. Hook To power outlet (120 V AC, 60 Hz) AC adaptor To single-line telephone jack (RJ11C) Telephone line cord Charger unit (KX-TG5452 and KX-TG5453 only) To power outlet (120 V AC, 60 Hz) AC adaptor Note: L Base unit: Use only the included Panasonic AC adaptor PQLV1. L Charger unit: Use only the included Panasonic AC adaptor KX-TCA1.
TG5451_5452_5453.book Page 10 Friday, February 18, 2005 11:38 AM Preparation If you subscribe to an xDSL service L Please attach a noise filter (contact your xDSL provider) to the telephone line between the base unit and the telephone line jack in the event of the following: – Noise is heard during conversations. – Caller ID features (page 26) do not function properly. Battery installation 1 Insert the battery (1), and press it down until it snaps into the compartment (2).
TG5451_5452_5453.book Page 11 Friday, February 18, 2005 11:38 AM Preparation Battery charge Place the handset on the base unit or charger for 6 hours before initial use. L The unit will beep once, the CHARGE indicator will light, and “Charging” will be displayed. L “Charge completed” is displayed when the battery has been fully charged. The CHARGE indicator will remain lit.
TG5451_5452_5453.book Page 12 Friday, February 18, 2005 11:38 AM Preparation Battery performance After your Panasonic battery is fully charged, you can expect the following performance: Operation Operating time While in use (talking) Up to 5 hours While not in use (standby)*1 Up to 11 days While using the Clarity Booster feature (page 20) Up to 3 hours *1 Handset is off the base unit or charger but not in use.
TG5451_5452_5453.book Page 13 Friday, February 18, 2005 11:38 AM Preparation Controls and displays Controls Base unit A BC KX-TG5453 D E F G H I J K L M G KX-TG5452 KX-TG5451 N A B C D E F G H I J {SELECT} {CALL} {LOCATOR/INTERCOM 1} {LOCATOR/INTERCOM 2} {LOCATOR/INTERCOM} CHARGE indicator Antenna Speaker Display {ANSWER ON} ANSWER ON indicator O P QR S T K L M N O P Q R {GREETING REC} (Recording) {GREETING CHECK} {ERASE} Charge contacts MIC (Microphone) VOL.
TG5451_5452_5453.book Page 14 Friday, February 18, 2005 11:38 AM Preparation Handset Charger unit (KX-TG5452 and KXTG5453 only) I A J A B K C D B L M E N F G O H P Q A B C D E F G H I J K L M N O P Q 14 B A Charge contacts B CHARGE indicator Using the navigator key The handset navigator key can be used to navigate through menus and to select items shown on the display, by pressing {^}, {V}, {<}, or {>}.
TG5451_5452_5453.book Page 15 Friday, February 18, 2005 11:38 AM Preparation Display Base unit display items Displayed Meaning item E Flashes when message memory is full. E Flashes when the date and time need to be set. C Base unit is on an intercom call, or handset is using the answering system. When flashing: base unit is paging or is being paged. B C Line is in use. When flashing: a call is on hold or the answering system is answering a call. When flashing rapidly: a call is being received.
TG5451_5452_5453.book Page 16 Friday, February 18, 2005 11:38 AM Preparation Setting the date and time Set the date and time so that the unit will announce the day and time each message was recorded by the answering system (page 47) when you play back messages. 1 2 Press {MENU}. Scroll to “Date and time” by pressing {V} or {^}, then press {>} or {Select}. Date and time KBack dB SelectL 3 Enter the current month, day, and year by selecting 2 digits for each.
TG5451_5452_5453.book Page 17 Friday, February 18, 2005 11:38 AM Making/Answering Calls 4 Making calls Soft keys {OFF} {C} {s} Navigator key {MUTE} {CLEAR} {*} {HOLD} {PAUSE} {REDIAL} Microphone 1 Lift the handset and press {C}. L “Talk” will be displayed. 2 3 Dial the phone number. When finished talking, press {OFF} or place the handset on the base unit or charger. Note: L Talk alternately with the caller in a quiet room.
TG5451_5452_5453.book Page 18 Friday, February 18, 2005 11:38 AM Making/Answering Calls To make a call using the redial list The last 5 phone numbers dialed are stored in the redial list. 1 2 3 Press {REDIAL}. L The last number dialed will be displayed. Press {V} or {^} repeatedly to display the desired number. L To delete the displayed number, press {CLEAR}. L To exit the list, press {OFF}. Press {C}, {s}, or {Call}. Answering calls When a call is being received, the ringer indicator flashes rapidly.
TG5451_5452_5453.book Page 19 Friday, February 18, 2005 11:38 AM Making/Answering Calls Useful features during a call HOLD button This feature allows you to put an outside call on hold. MUTE button You can mute your voice during a conversation. While mute is turned on you will be able to hear the other party, but the other party will not be able to hear you. To mute your voice, press {MUTE}. Example: Talk 00-00-30 KX-TG5451: Press {HOLD} during an outside call. L “Hold” will be displayed.
TG5451_5452_5453.book Page 20 Friday, February 18, 2005 11:38 AM Making/Answering Calls Clarity booster This feature can improve sound clarity when the handset is used in an area where there may be interference. During an outside call, this feature will be turned on automatically when necessary. This feature will turn off when you hang up or put a call on hold. It will not turn off automatically during a call. You can also turn this feature on or off manually. 1 2 Press {MENU} during an outside call.
TG5451_5452_5453.book Page 21 Friday, February 18, 2005 11:38 AM Making/Answering Calls For Call Waiting service users To use Call Waiting, you must subscribe to your telephone company’s Call Waiting service. This feature allows you to receive calls while you are already talking on the phone. If you receive a call while on the phone, you will hear a Call Waiting tone. Press {Flash} to answer the 2nd call. L The 1st call is put on hold while you answer the 2nd call. L To switch between calls, press {Flash}.
TG5451_5452_5453.book Page 22 Friday, February 18, 2005 11:38 AM Phonebook Using the phonebook The handset phonebook allows you to make calls without having to dial manually. You can add 50 names and phone numbers to the handset phonebook and search for phonebook entries by name. Adding items to the phonebook 1 Press {Phonebook}. Rcvd Kcalls 2 Press {Add}. L The display shows the number of items in the phonebook. 8 Press {OFF}.
TG5451_5452_5453.book Page 23 Friday, February 18, 2005 11:38 AM Phonebook Calling someone in the phonebook Phonebook items can be searched for alphabetically by scrolling through the phonebook items. 1 2 Press {Phonebook}. L For quick search, you can skip to step 3. 4 Press {V} or {^} repeatedly to display the desired item. L To exit the phonebook, press {OFF}. To search for a name by initial 2 3 Press {Phonebook}, then press {Search}. 2 Press {V} or {^} repeatedly to display the desired item.
TG5451_5452_5453.book Page 24 Friday, February 18, 2005 11:38 AM Phonebook Chain dial feature This feature allows you to dial phone numbers from the phonebook while you are on a call. Example: Using a long distance calling card 1 Dial from the phonebook: 1-800-012-3456 (Calling card access number). 2 When prompted, dial from the phonebook: 1234 (Calling card PIN). 3 When prompted, dial from the phonebook: 1-555-012-3456 (the person you want to call).
TG5451_5452_5453.book Page 25 Friday, February 18, 2005 11:38 AM Phonebook L To copy another item, repeat from step 5. Copying all items 1 2 Press {MENU}. 7 Scroll to “Copy phonebook” by pressing {V} or {^}, then press {>}. Copying all items 3 Scroll to “Copy all items” by pressing {V} or {^}, then press {>}. L When all items have been copied, “Complete” will be displayed. L The destination handset display will show “Phonebook Receiving”, then “Phonebook Received”. 4 1 2 Press {MENU}.
TG5451_5452_5453.book Page 26 Friday, February 18, 2005 11:38 AM Caller ID Service Using Caller ID service This unit is Caller ID compatible. To use Caller ID features, you must subscribe to your telephone company’s Caller ID service. Caller ID features When an outside call is being received, the calling party’s name or telephone number will be displayed. Caller information for the last 50 different callers will be logged in the caller list, allowing you to return missed calls.
TG5451_5452_5453.book Page 27 Friday, February 18, 2005 11:38 AM Caller ID Service not be announced. The announcement is heard at the ringer volume (page 38, 42). L When you receive a call while on the phone, the 2nd caller’s name will not be announced even if you subscribe to both Caller ID and Call Waiting with Caller ID services. L If this feature is turned off, caller names will not be announced (page 39, 43). L Usually the unit will announce the caller’s name after the 2nd ring.
TG5451_5452_5453.book Page 28 Friday, February 18, 2005 11:38 AM Caller ID Service Caller list Caller information for the last 50 different callers will be logged in the caller list. You can use this list to return missed calls. L Caller information includes caller names and phone numbers, the date and time of calls, and the number of times the caller called. Missed calls If a call is not answered, the unit treats the call as a missed call. The number of missed calls is shown on the handset display.
TG5451_5452_5453.book Page 29 Friday, February 18, 2005 11:38 AM Caller ID Service Editing a caller’s phone number before calling back You can edit a phone number in the caller list by removing its area code and/or the long distance code “1”. 1 2 Press {V} or {^} to enter the caller list. 3 Press {Edit} repeatedly until the phone number is shown in the desired format. Each time you press {Edit}, the phone number will be rearranged into one of 3 patterns.
TG5451_5452_5453.book Page 30 Friday, February 18, 2005 11:38 AM Caller ID Service Erasing caller information Erasing a selected item 1 2 Press {V} or {^} to enter the caller list. 3 Press {CLEAR}. L To erase other items, repeat from step 2. L To exit the caller list, press {OFF}. Press {V} or {^} repeatedly to display the desired item. Erasing all items Make sure that you have no missed calls. 1 2 Press {V} or {^} to enter the caller list. 3 Press {Yes}. 30 Press {All erase}.
TG5451_5452_5453.book Page 31 Friday, February 18, 2005 11:38 AM Intercom Features From the base unit to the handset Intercom 1 Base unit: Press {LOCATOR/INTERCOM}. L The handset will beep for 1 minute. L To stop paging, press {LOCATOR/ INTERCOM}. Note: L If you have difficulty hearing the other party while using the speaker, decrease the speaker volume. L If you receive a phone call while talking on the intercom, you will hear 2 tones (page 39, 42).
TG5451_5452_5453.book Page 32 Friday, February 18, 2005 11:38 AM Intercom Features For KX-TG5452 users From the base unit to a handset Call the desired unit by selecting the extension number, shown in the upper right of each handset’s display. The base unit’s extension number is 0. L To confirm the handset’s extension number ([1] or [2]), place the handset on the base unit or charger. L The base unit will display the paging or paged handset number (H1 or H2).
TG5451_5452_5453.book Page 33 Friday, February 18, 2005 11:38 AM Intercom Features For KX-TG5453 users From the base unit to a handset Call the desired unit by selecting the extension number, shown in the upper right of each handset’s display. The base unit’s extension number is 0. L To confirm the handset’s extension number ([1], [2], or [3]), place the handset on the base unit or charger. L The base unit will display the paging or paged handset number (H1, H2, or H3).
TG5451_5452_5453.book Page 34 Friday, February 18, 2005 11:38 AM Intercom Features Transferring a call (KXTG5452 and KX-TG5453 only) call will ring at your handset again. If you still do not answer the call within 4 minutes, the call will be disconnected. Outside calls can be transferred between 2 handsets. 1 During an outside call, press {INTERCOM}. L The call will be put on hold. 2 KX-TG5452 users: To page the other handset, press {handset[1]} or {handset[2]}.
TG5451_5452_5453.book Page 35 Friday, February 18, 2005 11:38 AM Intercom Features Conference calls (KXTG5452 and KX-TG5453 only) A conference call allows 2 handsets to speak together with an outside party. 1 During an outside call, press {INTERCOM}. L The call will be put on hold. 2 KX-TG5452 users: To page the other handset, press {handset[1]} or {handset[2]}. KX-TG5453 users: To page another handset, press {HS[1]}, {HS[2]}, or {HS[3]}.
TG5451_5452_5453.book Page 36 Friday, February 18, 2005 11:38 AM Programmable Settings Guide to handset programming For your reference, a chart of all programmable functions is printed below. Details for each item can be found on the corresponding pages. To program, press {MENU}, press {V} or {^} to scroll through the menu, and press {>} or {Select} when the desired menu item or setting is displayed. Important: L Before programming, make sure the handset and base unit are not being used.
TG5451_5452_5453.book Page 37 Friday, February 18, 2005 11:38 AM Programmable Settings Main menu Sub-menu 1 Initial setting Set base unit Sub-menu 2 Page *3 page 42 Ringer tone *3 page 42 Interrupt tone Talking CallerID *3 page 43 Registration – page 43 Change language – page 40 *1 Can be used to activate Caller IQ. See the leaflet included with this unit for more information. *2 “Activate CIQ?” is displayed if you have not subscribed to openLCR service.
TG5451_5452_5453.book Page 38 Friday, February 18, 2005 11:38 AM Programmable Settings Ringer settings Handset ringer volume 4 levels (high/medium/low/off) are available. The default setting is HIGH. 1 2 Press {MENU}. Handset ringer tone You can change the ringer tone heard when an outside call is received. There are 3 tones and 4 melodies. The default setting is “Tone 1”. 1 2 Scroll to “Ringer setting” by pressing {V} or {^}, then press {>}.
TG5451_5452_5453.book Page 39 Friday, February 18, 2005 11:38 AM Programmable Settings Handset interrupt tone This tone lets you know when you receive a call while you are on an intercom call (page 31). “2” (default): The tone will sound 2 times. “On”: The tone will sound for as long as the line rings. “Off”: Turns this feature off. 1 2 Press {MENU}. 3 Call options Auto talk When this feature is turned on, you can answer a call by lifting the handset off the base unit or charger without pressing {C}.
TG5451_5452_5453.book Page 40 Friday, February 18, 2005 11:38 AM Programmable Settings Caller ID edit You can turn the Caller ID number auto edit feature (page 29) on or off. The default setting is ON. 1 2 Press {MENU}. Scroll to “Initial setting” by pressing {V} or {^}, then press {>}. Display options Handset LCD contrast You can adjust the handset display contrast. There are 6 levels. The default setting is level 3. 1 2 Press {MENU}.
TG5451_5452_5453.book Page 41 Friday, February 18, 2005 11:38 AM Programmable Settings Telephone settings Dialing mode If you cannot make calls, change this setting depending on your telephone line service. “Tone” (default): For tone dial service. “Pulse”: For rotary pulse dial service. Note: L The setting should stay at 700 ms unless pressing {Flash} fails to pick up the Call Waiting call. L If the unit is connected via a PBX, certain PBX functions (call transferring, etc.) may not work correctly.
TG5451_5452_5453.book Page 42 Friday, February 18, 2005 11:38 AM Programmable Settings Base unit settings 5 Press {V} or {^} repeatedly to select the desired setting. L You can also select the ringer tone by pressing {1} to {7}. L If the ringer volume has been turned off, the base unit will not ring. 6 Press {Save}, then press {OFF}. Base unit ringer volume 4 levels (high/medium/low/off) are available. The default setting is HIGH. Important: L Make sure the base unit is not being used.
TG5451_5452_5453.book Page 43 Friday, February 18, 2005 11:38 AM Programmable Settings Base unit Talking Caller ID This feature must be turned on or off for the base unit by using the handset (page 26). The default setting is ON. 1 2 Press {MENU}. 3 Scroll to “Set base unit” by pressing {V} or {^}, then press {>}. 4 5 6 Scroll to “Initial setting” by pressing {V} or {^}, then press {>}. Scroll to “Talking CallerID” by pressing {V} or {^}, then press {>}.
TG5451_5452_5453.book Page 44 Friday, February 18, 2005 11:38 AM Programmable Settings 1 Handset: Press {MENU}. 2 Scroll to “Initial setting” by pressing {V} or {^}, then press {>}. 3 Scroll to “Registration” by pressing {V} or {^}, then press {>}. 4 KX-TG5451 base unit: Press and hold {LOCATOR/ INTERCOM} until the CHARGE indicator flashes.
TG5451_5452_5453.book Page 45 Friday, February 18, 2005 11:38 AM Programmable Settings Programming via direct commands You can also program most features using “direct commands”—special codes that take you directly to the feature you wish to program and allow you to select the desired setting. There is no need to scroll through the unit’s menus. Details of each feature can be found on the corresponding pages. 1 2 3 Press {MENU}. 4 5 Press {Save}. Enter the desired feature code (shown below).
TG5451_5452_5453.
TG5451_5452_5453.book Page 47 Friday, February 18, 2005 11:38 AM Answering System Features Answering system The unit contains an answering system which can answer and record calls for you when you are unavailable to answer the phone. For details about memory capacity, see page 51. Important: L Only 1 person can access the answering system (listen to messages, record a greeting message, etc.) at a time. L When callers leave messages, the unit records the day and time of each message.
TG5451_5452_5453.book Page 48 Friday, February 18, 2005 11:38 AM Answering System Features To play back the greeting message Press {GREETING CHECK}. Erasing your greeting message Press {GREETING CHECK}, and then press {ERASE} while your greeting message is playing. L If you do not re-record your greeting message, the unit will use a prerecorded greeting message.
TG5451_5452_5453.book Page 49 Friday, February 18, 2005 11:38 AM Answering System Features Listening to messages When new messages have been recorded: – The MESSAGE indicator on the base unit will flash. – The message indicator on the handset will flash slowly if the message alert feature is turned on (page 55). The base unit display will show the number of messages (old and new) recorded by the answering system. Example: The total number of recorded messages is 10.
TG5451_5452_5453.book Page 50 Friday, February 18, 2005 11:38 AM Answering System Features Note: L Caller information for the erased messages will remain in the caller list. Listening to messages using the handset {MENU} {Select} {OFF} When new messages have been recorded, “New message” is displayed. 1 2 3 Press {MENU}. Press {Select} at “Message play”. L The unit will announce the number of new messages, and will play back the new messages.
TG5451_5452_5453.book Page 51 Friday, February 18, 2005 11:38 AM Answering System Features Calling back (Caller ID subscribers only) If Caller ID information was received for the call, you can call the caller back while listening to a message. Press {Call} during playback. Note: L To edit the number before calling back, press {Edit} repeatedly to select the desired format (page 29), then press {Call}, {C}, or {s}.
TG5451_5452_5453.book Page 52 Friday, February 18, 2005 11:38 AM Answering System Features Remote operation Using a touch tone phone, you can call your phone number from outside and access the unit to listen to messages. The unit’s voice guidance will prompt you to press certain dial keys to perform different operations. Important: L In order to operate the answering system remotely, you must first set a remote code (page 54). This code must be entered each time you operate the answering system remotely.
TG5451_5452_5453.book Page 53 Friday, February 18, 2005 11:38 AM Answering System Features Remote commands You can press dial keys to access certain answering system functions without waiting for the voice guidance to prompt you.
TG5451_5452_5453.book Page 54 Friday, February 18, 2005 11:38 AM Answering System Features Answering system settings Remote code A remote code must be entered when operating the answering system remotely. This code prevents unauthorized parties from listening to your messages remotely. Store any 2-digit number (00–99). The default setting is “11”. 1 2 Press {MENU}. 3 Scroll to “Set answering” by pressing {V} or {^}, then press {>}. 4 Scroll to “Remote code” by pressing {V} or {^}, then press {>}.
TG5451_5452_5453.book Page 55 Friday, February 18, 2005 11:38 AM Answering System Features Caller’s recording time Message alert You can change the maximum message recording time allotted to each caller. “1min”, “2min”, or “3min” (default): Caller messages are limited to 1 minute to 3 minutes. “Greeting only”: The unit plays the greeting message but does not record caller messages.
TG5451_5452_5453.book Page 56 Friday, February 18, 2005 11:38 AM Useful Information Wall mounting Base unit The base unit can be mounted on a wall phone plate. 1 Connect the AC adaptor. Fasten the AC adaptor cord. Hook To power outlet 2 Tuck the telephone line cord inside the wall mounting adaptor (1). Connect the telephone line cord (2). 1 2 3 Insert the hooks on the wall mounting adaptor into the holes (A) and (B) on the base unit.
TG5451_5452_5453.book Page 57 Friday, February 18, 2005 11:38 AM Useful Information 4 Adjust the adaptor to hold the base unit, then push it in the direction of the arrow until it clicks into place. 5 Connect the telephone line cord. Mount the unit, then slide it down. L Raise the antennas. To remove the wall mounting adaptor While pushing down the release levers (1), remove the adaptor (2). 2 For assistance, please call 1-800-211-PANA (7262).
TG5451_5452_5453.book Page 58 Friday, February 18, 2005 11:38 AM Useful Information Charger unit (KX-TG5452 and KX-TG5453 only) The charger can be wall mounted, as shown below. 1 2 3 4 Connect the AC adaptor. Drive the screws (not included) into the wall using the wall mount template (see below). Mount the charger (1). Slide it down (2) and to the right (3) until it is secure. 25.4 mm (1") 1 2 Screws To power outlet 25.
TG5451_5452_5453.book Page 59 Friday, February 18, 2005 11:38 AM Useful Information Belt clip Headset (optional) You can hang the handset on your belt or pocket using the included belt clip. Connecting an optional headset to the handset allows hands-free phone conversations. Please use only a Panasonic headset. See page 5 for compatible headsets and ordering information.
TG5451_5452_5453.book Page 60 Friday, February 18, 2005 11:38 AM Useful Information Error messages If the unit detects a problem, one of the following messages will be displayed on the handset. Display message Cause & solution Busy L The called handset or base unit is in use.*1 L The handset you tried to copy phonebook items to is in use.*1 L The handset you are calling is too far from the base unit.
TG5451_5452_5453.book Page 61 Friday, February 18, 2005 11:38 AM Useful Information Troubleshooting General use Problem Cause & solution The unit does not work. L Make sure that the battery is installed correctly (page 10). L Check the connections (page 9). L Fully charge the battery (page 11). L Clean the charge contacts and charge again (page 11). L Unplug the base unit’s AC adaptor to reset the unit. Reconnect the adaptor and try again. L Re-install the battery (page 10) and fully charge it.
TG5451_5452_5453.book Page 62 Friday, February 18, 2005 11:38 AM Useful Information Making/answering calls, Intercom Problem Cause & solution Static is heard, sound cuts in and out. Interference from other electrical units. L Move the handset and the base unit away from other electrical appliances. L Move closer to the base unit. L Raise the base unit antennas. L Turn on the clarity booster feature (page 20).
TG5451_5452_5453.book Page 63 Friday, February 18, 2005 11:38 AM Useful Information Problem Cause & solution While storing an item in the phonebook, the handset starts to ring. L A call is being received. Answer the call and start again from the beginning after hanging up. Copying stopped with an item displayed. L The destination handset may have lost communication with the base unit, or the destination handset user may have pressed {C} or {s}.
TG5451_5452_5453.book Page 64 Friday, February 18, 2005 11:38 AM Useful Information Problem Cause & solution The handset or base unit does not announce the displayed caller’s name correctly. L Name pronunciation may vary. This feature may not pronounce all names correctly. L The handset or base unit will announce each letter of abbreviations, such as “Co.” and “Inc.”. L Caller ID supports name of up to 15 letters. If the caller’s name has more than 15 letters, the name will not be announced correctly.
TG5451_5452_5453.book Page 65 Friday, February 18, 2005 11:38 AM Useful Information Problem Cause & solution When you play back messages or turn on the answering system, the base unit and handset announce the day and time incorrectly. L Set the date and time again (page 16). Battery charge Problem Cause & solution “Recharge battery” is displayed, 7 flashes or the handset beeps intermittently. L Fully charge the battery (page 11). “Charge for 6h” and 8 are displayed and the handset does not work.
TG5451_5452_5453.book Page 66 Friday, February 18, 2005 11:38 AM Useful Information Important information about subscription services In order to use Caller ID, Call Waiting, or Call Waiting Caller ID (CWID), you must first contact your telephone company and subscribe to the desired service. L For more information, contact your telephone company.
TG5451_5452_5453.book Page 67 Friday, February 18, 2005 11:38 AM Useful Information FCC and other information This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA. On the bottom of this equipment is a label that contains, among other information, a product identifier in the format US:ACJ----------. If requested, this number must be provided to the telephone company. L Registration No ............(found on the bottom of the unit) L Ringer Equivalence No. (REN).....
TG5451_5452_5453.book Page 68 Friday, February 18, 2005 11:38 AM Useful Information When you hold the phone to your ear, noise might be heard in your Hearing Aid. Some Hearing Aids are not adequately shielded from external RF (radio frequency) energy. If noise occurs, use an optional headset accessory or the speakerphone option (if applicable) when using this phone.
TG5451_5452_5453.book Page 69 Friday, February 18, 2005 11:38 AM Useful Information FCC RF Exposure Warning: This product complies with FCC radiation exposure limits set forth for an uncontrolled environment. To comply with FCC RF exposure requirements the base unit must be installed and operated with its antenna located 20 cm or more between antenna and all person’s body (excluding extremities of hands, wrist and feet).
TG5451_5452_5453.book Page 70 Friday, February 18, 2005 11:38 AM Useful Information Technical information Charger unit (KX-TG5452 and KX-TG5453 only) Base unit Operating environment: 5 °C – 40 °C (41 °F – 104 °F) Operating environment: 5 °C – 40 °C (41 °F – 104 °F) Frequency: 5.76 GHz – 5.84 GHz Dimensions: Approx. height 95 mm x width 174 mm x depth 143 mm (33/4" x 627/32" x 55/8") Mass (Weight): Approx. 320 g (0.71 lb.) Power consumption: Standby: Approx. 2.3 W Maximum: Approx. 5.
TG5451_5452_5453.book Page 71 Friday, February 18, 2005 11:38 AM Useful Information Warranty PANASONIC CONSUMER ELECTRONICS COMPANY, DIVISION OF PANASONIC CORPORATION OF NORTH AMERICA One Panasonic Way, Secaucus, New Jersey 07094 PANASONIC PUERTO RICO, INC. San Gabriel Industrial Park, Ave. 65 de Infantería, Km. 9.
TG5451_5452_5453.book Page 72 Friday, February 18, 2005 11:38 AM Useful Information Limited Warranty Limits And Exclusions This Limited Warranty ONLY COVERS failures due to defects in materials or workmanship, and DOES NOT COVER normal wear and tear or cosmetic damage.
TG5451_5452_5453.book Page 73 Friday, February 18, 2005 11:38 AM Useful Information Customer services Customer Services Directory Obtain Product Information and Operating Assistance; locate your nearest Dealer or Servicenter; purchase Parts and Accessories; or make Customer Service and Literature requests by visiting our Web Site at: http://www.panasonic.com/consumersupport or, contact us via the web at: http://www.panasonic.
TG5451_5452_5453.
TG5451_5452_5453.
TG5451_5452_5453.book Page 76 Friday, February 18, 2005 11:38 AM If you need assistance with setup or operation; 1 2 3 Visit our website: http://www.panasonic.com/consumersupport Contact us via the web at: http://www.panasonic.com/contactinfo Call us at: 1-800-211-PANA (7262) TTY users (hearing or speech impaired users) can call 1-877-833-8855. When you ship the product; L Carefully pack your unit, preferably in the original carton. L Attach a letter, detailing the symptom, to the outside of the carton.