TG5771_5776_5777.book Page 1 Friday, February 23, 2007 3:52 PM Operating Instructions 5.8 GHz Expandable Digital Cordless Answering System KX-TG5771 Model No. KX-TG5776 Model No. KX-TG5779 Model No. 5.8 GHz Expandable Digital Cordless Answering System with Two Handsets Model No. KX-TG5777 Model shown is KX-TG5771. This unit is compatible with Caller ID. To use this feature, you must subscribe to the appropriate service offered by your telephone service provider.
TG5771_5776_5777.book Page 2 Friday, February 23, 2007 3:52 PM Table of Contents Introduction Introduction. . . . . . . . . . . . . . . . . . . . . . . 3 About these operating instructions . . . . . 4 Expanding your phone system . . . . . . . . 7 Accessory information . . . . . . . . . . . . . . 9 Important safety instructions . . . . . . . . 12 For best performance . . . . . . . . . . . . . . 14 Preparation Setting up the base unit . . . . . . . . . . . . 15 Setting up the handset . . . . . . . . . . .
TG5771_5776_5777.book Page 3 Friday, February 23, 2007 3:52 PM Introduction Introduction Thank you for purchasing a Panasonic cordless telephone. We recommend keeping a record of the following information for future reference. Serial No. (found on the bottom of the base unit) Date of purchase Name and address of dealer Attach your purchase receipt here. For assistance, please visit http://www.panasonic.
TG5771_5776_5777.book Page 4 Friday, February 23, 2007 3:52 PM Introduction About these operating instructions Notable differences among KX-TG5771, KX-TG5776, KX-TG5777, and KX-TG5779 These operating instructions can be used for the following models: – KX-TG5771 features a monochrome display handset (KX-TGA570). – KX-TG5776 and KX-TG5779 feature a color display handset with USB-support (KXTGA571). – KX-TG5777 features 2 color display handsets with USB-support (KX-TGA571). – KX-TG5779 also features the 5.
TG5771_5776_5777.book Page 5 Friday, February 23, 2007 3:52 PM Introduction KX-TG5771 KX-TG5776 Monochrome display handset Color display handset KX-TG5777 2 color display handsets KX-TG5779 Color display handset Cordless camera*1 *1 For operations related to this cordless camera, refer to its operating instructions included with this unit. For assistance, please visit http://www.panasonic.
TG5771_5776_5777.book Page 6 Friday, February 23, 2007 3:52 PM Introduction Monochrome display model: KX-TGA570 (included with KX-TG5771) Color display model: KX-TGA571 (included with KX-TG5776/ KX-TG5777/KX-TG5779) 1 1 2 2 1 Using the soft keys The handset features 3 soft keys. By pressing a soft key, you can select the feature shown directly above it on the display. 1 Using the soft keys The handset features 2 soft keys and joystick (middle soft key).
TG5771_5776_5777.book Page 7 Friday, February 23, 2007 3:52 PM Introduction Expanding your phone system You can expand the phone system by registering the following handsets and other devices to a single base unit (KX-TG5771, KX-TG5776, KX-TG5777, or KX-TG5779): max. 8 For further information or to order these handsets and devices, visit http://www.panasonic.com or call the phone number noted on page 11. Handsets and other devices: max. 8 5.
TG5771_5776_5777.book Page 8 Friday, February 23, 2007 3:52 PM Introduction Handset feature overview for KX-TGA570 and KX-TGA571 Operations and features of the 2 different accessory handsets have certain differences as indicated in the table below. Feature KX-TGA570 KX-TGA571 Description Same handset supplied with KX-TG5771 Same handset supplied with KX-TG5776/ KX-TG5777/KX-TG5779 – Display type Monochrome Color – Display size 1.4 inch 1.
TG5771_5776_5777.book Page 9 Friday, February 23, 2007 3:52 PM Introduction Accessory information Included accessories Quantity No.
TG5771_5776_5777.book Page 10 Friday, February 23, 2007 3:52 PM Introduction 1 2 3 4 5 6 7 8 9 j k l *1 The handset cover comes attached to the handset. *2 Both of the USB cables function well. *3 Allows you to install the GIGARANGE USB Utility software on a compatible computer. 10 For assistance, please visit http://www.panasonic.
TG5771_5776_5777.book Page 11 Friday, February 23, 2007 3:52 PM Introduction Additional/replacement accessories Accessory item Order number Rechargeable nickel metal hydride (Ni-MH) battery HHR-P105 Headset KX-TCA60, KX-TCA86, KX-TCA88HA, KX-TCA92, KX-TCA93, KX-TCA94, or KX-TCA95 Belt clip PQKE10457Z1 Wall-mounting adaptor for base unit PQKL10078Z1 T-adaptor KX-J66 Note: L You can expand your phone system by registering additional compatible Panasonic units (page 7).
TG5771_5776_5777.book Page 12 Friday, February 23, 2007 3:52 PM Introduction Important safety instructions When using the product, basic safety precautions should always be followed to reduce the risk of fire, electric shock, or personal injury. 1. Read all instructions carefully. 2. Follow all warnings and instructions marked on the product. 3. Unplug the product from power outlets before cleaning. Do not use liquid or aerosol cleaners. Use a moist cloth for cleaning. 4.
TG5771_5776_5777.book Page 13 Friday, February 23, 2007 3:52 PM Introduction CAUTION: Installation L Never install telephone wiring during a lightning storm. L Never install telephone jacks in wet locations unless the jack is specifically designed for wet locations. L Never touch uninsulated telephone wires or terminals unless the telephone line has been disconnected at the network interface. L Use caution when installing or modifying telephone lines. L Do not touch the plug with wet hands.
TG5771_5776_5777.book Page 14 Friday, February 23, 2007 3:52 PM Introduction the power outlet, then wiping with a dry cloth. Accumulated dust may cause an insulation defect from moisture, etc. resulting in a fire. L If you use the handset near another cordless phone’s base unit, noise may be heard. Move away from the other cordless phone’s base unit and closer to your base unit.
TG5771_5776_5777.book Page 15 Friday, February 23, 2007 3:52 PM Preparation Setting up the base unit Connecting the AC adaptor and telephone line cord Connect the telephone line cord until it clicks into the base unit (A) and telephone line jack (B). Connect the AC adaptor cord by pressing the plug firmly (C). L Use only the included Panasonic AC adaptor PQLV207. line or to the same telephone jack using a Panasonic T-adaptor (page 11).
TG5771_5776_5777.book Page 16 Friday, February 23, 2007 3:52 PM Preparation Setting up the handset Battery installation/replacement 1 Press the notch of the handset cover firmly, and slide it in the direction of the arrow. L If necessary, remove the old battery. 2 Insert the battery (A), and press it down until it snaps into position (B). Then close the handset cover (C, D). Connecting the charger (KX-TG5777 only) L Use only the included Panasonic AC adaptor PQLV207.
TG5771_5776_5777.book Page 17 Friday, February 23, 2007 3:52 PM Preparation Please call 1-800-8-BATTERY (1-800822-8837) for information on how to recycle this battery. Place the handset on the base unit or charger for 7 hours before initial use. While charging, the charge indicator on the handset lights in amber. When the battery is fully charged, the indicator lights in green. Note: L If you want to use the handset immediately, charge the battery for at least 15 minutes.
TG5771_5776_5777.book Page 18 Friday, February 23, 2007 3:52 PM Preparation Panasonic battery performance Operation Operating time Wall mounting for charger (KX-TG5777 only) While in use (talking) Up to 5 hours 1 While not in use (standby) Up to 7 days While using the clarity booster feature (page 29) Up to 3 hours Note: L Battery operating time may be shortened over time depending on usage conditions and surrounding temperature.
TG5771_5776_5777.
TG5771_5776_5777.
TG5771_5776_5777.book Page 21 Friday, February 23, 2007 3:52 PM Preparation A B C D E Color display model: KX-TGA571 (included with KX-TG5776/KX-TG5777/KXTG5779) Handset J K A B L C B D M E N F G H O Speaker Soft keys Headset jack/Audio jack {C} (TALK) Joystick L {^} {V}: Push the joystick up or down. L {<} {>}: Push the joystick left or right. L Middle soft key: Push the center of joystick.
TG5771_5776_5777.book Page 22 Friday, February 23, 2007 3:52 PM Preparation Handset display items Displays Base unit display items Displayed Meaning item Displayed item Meaning --:--*2 The date and time need to be set. w Within range of the base unit E Flashes when message memory is full. O Base unit ringer is off. E Greeting or memo message recording error 9@ Answering system is in greeting only mode (caller messages cannot be recorded).
TG5771_5776_5777.book Page 23 Friday, February 23, 2007 3:52 PM Preparation Handset menu icons When in standby mode, pressing {MENU} (middle soft key) on the handset reveals the main menu. From here you can access various features and settings. Note: L The menu icons shown in these operating instructions vary slightly from the actual icons shown on the display.
TG5771_5776_5777.book Page 24 Friday, February 23, 2007 3:52 PM Preparation Symbols used in these operating instructions Symbol Meaning { }: button name/soft key name The words in the brackets indicate button names/ soft key names on the handset and base unit. Example: Unit keys: {C}, {OFF} Soft keys: {CID}, {C} i Proceed to the next operation. Example: “Ringer ID” The words in quotations indicate the menu on the display.
TG5771_5776_5777.book Page 25 Friday, February 23, 2007 3:52 PM Preparation Setting the unit before use Important: L To program features by scrolling through the display menus, see page 41. Display language The default setting is “English”. Handset 1 {MENU} (middle soft key) i {#}{1}{1}{0} 2 3 Select the desired setting. Date and time Set the correct date and time. When you play back a message from the answering system (page 55), the unit announces the day and time it was recorded.
TG5771_5776_5777.book Page 26 Friday, February 23, 2007 3:52 PM Making/Answering Calls Making calls Making a call using the redial list The last 10 phone numbers dialed are stored in the redial list. Using the handset 1 2 1 Lift the handset and dial the phone number. L To correct a digit, press {CLEAR}. 2 3 Press {C} or {CALL}. When you finish talking, press {OFF} or place the handset on the base unit or charger.
TG5771_5776_5777.book Page 27 Friday, February 23, 2007 3:52 PM Making/Answering Calls Note: L A 3.5 second pause is inserted each time {PAUSE} is pressed. Press repeatedly to insert longer pauses. Using the base unit 1 2 3 4 Answering calls When a call is being received, the ringer indicator on the handset and the IN USE indicator on the base unit flash rapidly. {SP-PHONE} Using the handset Dial the phone number. 1 Lift the handset and press {C} or {s}.
TG5771_5776_5777.book Page 28 Friday, February 23, 2007 3:52 PM Making/Answering Calls Using the base unit 1 2 3 {SP-PHONE} Speak into the MIC. When you finish talking, press {SPPHONE}. Adjusting the ringer volume Press {^} or {V} repeatedly to select the desired volume when in standby mode. L To turn the ringer off, press and hold {V} until the unit beeps. L To stop ringing, press {STOP}. Setting the ringer tone There are 3 tones and 3 melodies. 1 2 Press {^} or {V}.
TG5771_5776_5777.book Page 29 Friday, February 23, 2007 3:52 PM Making/Answering Calls Mute While mute is turned on, you can hear the other party, but the other party cannot hear you. Handset To mute your voice, press {MUTE}. L To return to the conversation, press {MUTE} or {C}. Note: L {MUTE} is a soft key visible on the handset display during a call. Base unit To mute your voice, press {MUTE}. L To return to the conversation, press {MUTE} or {SP-PHONE}.
TG5771_5776_5777.book Page 30 Friday, February 23, 2007 3:52 PM Making/Answering Calls Handset voice enhancer This feature clarifies the voice of the person you are talking to, reproducing a more natural-sounding voice that is easier to hear and understand. 1 2 Press {MENU} during an outside call. Press {3} to select “Voice enhancer” or “V.E. off”. L When this feature is turned on, W is displayed.
TG5771_5776_5777.book Page 31 Friday, February 23, 2007 3:52 PM Phonebook Handset phonebook No Ringer ID You can add up to 50 items to the handset phonebook and search for phonebook items by name. Turns the ringer ID off. Press {SELECT}, then go to step 9. Tone & Melody Tone and melodies stored in the handset at the time of purchase. Custom ring Melodies you stored in the handset (page 49). 2 melodies are already stored at the time of purchase (page 49).
TG5771_5776_5777.book Page 32 Friday, February 23, 2007 3:52 PM Phonebook L If you select “No Light-upID” (default), the handset uses the ringer indicator color you selected on page 47 when a call is received from that caller. Color display models: KX-TG5776/KX-TG5777/KX-TG5779/KXTGA571 1 2 3 {C} (right soft key) 4 Enter the phone number (max. 32 digits). i {OK} L If you do not need to assign the ringer ID, light-up ID, and picture ID, go to step 15. 5 6 7 8 32 {ADD} Enter the name (max.
TG5771_5776_5777.book Page 33 Friday, February 23, 2007 3:52 PM Phonebook L If you select “No Light-upID” (default), the handset uses the ringer indicator color you selected on page 47 when a call is received from that caller. L To assign an image in “My pictures” as picture ID, you can copy it from your computer (refer to the help section of the GIGARANGE USB Utility application).
TG5771_5776_5777.book Page 34 Friday, February 23, 2007 3:52 PM Phonebook To change the picture ID (Color display models only: KX-TG5776/ KX-TG5777/ KX-TG5779/ KX-TGA571) Editing items in the handset phonebook 1 2 {C} (right soft key) i {SEARCH} 3 Select the information you want to edit. Find the desired item (page 33). i {EDIT} To change the name or phone number Select the name or phone number. i {SELECT} i Edit the information (page 33).
TG5771_5776_5777.book Page 35 Friday, February 23, 2007 3:52 PM Phonebook Chain dial Copying an item This feature allows you to dial phone numbers in the handset phonebook while you are on a call. This feature can be used, for example, to dial a calling card access number or bank account PIN that you have stored in the handset phonebook, without having to dial manually. 1 2 {C} (right soft key) i {SEARCH} 3 4 “Copy” i {SELECT} 1 2 During an outside call, press {C}. Find the desired item (page 33).
TG5771_5776_5777.book Page 36 Friday, February 23, 2007 3:52 PM Base Unit Speed Dialer Base unit speed dialer You can assign one phone number to each of the 10 dial keys ({0} – {9}) on the base unit. Adding phone numbers to the speed dialer Important: L Before adding phone numbers, make sure the base unit is not being used. 1 2 3 4 {PROGRAM} Enter the phone number (max. 32 digits). L If a pause is required for dialing, press {PAUSE} where needed. L If you misdial, press {STOP} and repeat from step 1.
TG5771_5776_5777.book Page 37 Friday, February 23, 2007 3:52 PM Caller ID Service Using Caller ID service This unit is Caller ID compatible. To use Caller ID features, you must subscribe to Caller ID service of your telephone service provider. Caller ID features When an outside call is being received, the calling party’s name and telephone number are displayed. Caller information for the last 50 callers is logged in the caller list by the most recent call to the oldest.
TG5771_5776_5777.book Page 38 Friday, February 23, 2007 3:52 PM Caller ID Service L When you receive a call while on the phone, the 2nd caller’s name is not announced even if you subscribe to both Caller ID and Call Waiting with Caller ID services. L The announcement is heard at the same level as the ringer volume (page 28, 47). L This feature can be turned on or off (page 47).
TG5771_5776_5777.book Page 39 Friday, February 23, 2007 3:52 PM Caller ID Service 3 1 – Area code – Local phone number Caller list Important: L Only 1 person can access the caller list at a time. Viewing the caller list and calling back 1 2 3 {CID} (left soft key) Press {V} to search from the most recent call, or {^} to search from the oldest call. {C} Note: L A Q is displayed in caller information which has already been viewed or answered by any handset.
TG5771_5776_5777.book Page 40 Friday, February 23, 2007 3:52 PM Caller ID Service again, turn it on and reprogram the area codes you want to edit once again. Storing caller information into the handset phonebook 1 2 3 4 {CID} (left soft key) Select the desired item. L To edit the number, press {EDIT} repeatedly until the phone number is shown in the desired format. {SAVE} Continue from step 3, “Editing items in the handset phonebook”, page 34.
TG5771_5776_5777.book Page 41 Friday, February 23, 2007 3:52 PM Programming Programmable settings You can customize the unit by programming the following features using the handset. To access the features, there are 2 methods: – scrolling through the display menus (page 41) – using the direct commands (page 46) L Mainly the direct command method is used in these operating instructions. L To change the base unit ringer volume and tone, see page 28.
TG5771_5776_5777.book Page 42 Friday, February 23, 2007 3:52 PM Programming Monochrome display models: KX-TG5771/KX-TGA570 L When you find “*1” in the following table, refer to the note below. *1 If you program these settings using one of the handsets, you do not need to program the same item using another handset.
TG5771_5776_5777.
TG5771_5776_5777.book Page 44 Friday, February 23, 2007 3:52 PM Programming Color display models: KX-TG5776/KX-TG5777/KX-TG5779/KX-TGA571 L When you find “*1” in the following table, refer to the note below. *1 If you program these settings using one of the handsets, you do not need to program the same item using another handset.
TG5771_5776_5777.
TG5771_5776_5777.book Page 46 Friday, February 23, 2007 3:52 PM Programming Programming using the direct commands 1 2 3 4 {MENU} (middle soft key) i {#} Enter the desired feature code. Enter the desired setting code. L This step may vary depending on the feature being programmed. {SAVE} i {OFF} Note: L In the following table, < > indicates the default setting. L If you make a mistake or enter the wrong code, press {OFF}, then start again from step 1.
TG5771_5776_5777.
TG5771_5776_5777.book Page 48 Friday, February 23, 2007 3:52 PM Programming Feature Feature code To play all (All message playback) {3}{2}{4} To play new (New message playback) {3}{2}{3} VM tone detect {3}{3}{2} Setting code System setting*1 Page – – 56 – – 56 r 62 {1}: {0}: Off *1 If “System setting” column is checked, you do not need to program the same item using another handset.
TG5771_5776_5777.book Page 49 Friday, February 23, 2007 3:52 PM Programming Customizing handset ringer tone and display Handset ringer tone (for outside calls) You can change the ringer tone heard when an outside call is received. L You can record melodies for the handset ringer tone from an audio device (page 49). L Color display models only (KX-TG5776/ KX-TG5777/KX-TG5779/KX-TGA571): You can copy melodies (in WAV file format using a computer) to be used for the handset ringer tone.
TG5771_5776_5777.book Page 50 Friday, February 23, 2007 3:52 PM Programming 1 Connect the handset to the audio device (such as a CD player or computer) using the included audio cable. Audio device Headphone output, line out, etc. Example: Audio cable Note: L Monochrome display models (KXTG5771/KX-TGA570): The total recording time is about 90 seconds. L Color display models (KX-TG5776/KXTG5777/KX-TG5779/KX-TGA571): The total recording time is about 7 minutes.
TG5771_5776_5777.book Page 51 Friday, February 23, 2007 3:52 PM Programming Erasing a melody Handset 1 {MENU} (middle soft key) i {#}{1}{6}{6} 2 3 4 5 “List” i {SELECT} Select the desired item. i {MENU} “Erase” i {SELECT} “Yes” i {SELECT} i {OFF} Note: L If the erased melody was used for the handset ringer tone (page 49), “Tone 1” (default) is used instead of that melody.
TG5771_5776_5777.book Page 52 Friday, February 23, 2007 3:52 PM Programming Handset wallpaper (Color display models only) You can select the “wallpaper” pattern shown on the handset display in standby mode. There are 3 preset patterns. Important: L Only KX-TG5776, KX-TG5777, KXTG5779, and KX-TGA571 support this feature. L You can also download original images from your computer. Refer to the help section of the GIGARANGE USB Utility for details.
TG5771_5776_5777.book Page 53 Friday, February 23, 2007 3:52 PM Programming Viewing the handset memory status Handset 1 {MENU} (middle soft key) i {#}{6}{7}{0} 2 When finished, press {OFF}. Erasing melodies or images ringer ID assignment is canceled, and the handset ringer tone (page 49) is used instead of that song. L If the erased image was selected for the wallpaper, the sample picture “Wallpaper1” is used instead of that image.
TG5771_5776_5777.book Page 54 Friday, February 23, 2007 3:52 PM Answering System Answering system Important: L Only 1 person can access the answering system at a time. L When callers leave messages, the unit records the day and time of each message. Make sure the date and time have been correctly set (page 25). Memory capacity The total recording capacity (including caller messages and voice memos) is about 21 minutes. A maximum of 64 messages can be recorded.
TG5771_5776_5777.book Page 55 Friday, February 23, 2007 3:52 PM Answering System Erasing your greeting message Press {GREETING CHECK}, and then press {ERASE} while your greeting message is playing. Prerecorded greeting message If you erase or do not record your own greeting message, the unit plays a prerecorded greeting message for callers and ask them to leave messages.
TG5771_5776_5777.book Page 56 Friday, February 23, 2007 3:52 PM Answering System Listening to messages using the handset When new messages have been recorded: – “New message” is displayed. – the message indicator on the handset slowly flashes blue if the message alert feature is turned on (page 61). 1 2 {MENU} (middle soft key) i {PLAY} L The handset plays new messages including memo messages. L When you have no new messages, the handset plays back all messages. When finished, press {OFF}.
TG5771_5776_5777.book Page 57 Friday, February 23, 2007 3:52 PM Answering System Erasing a message 1 2 Press {ERASE} during playback. “Yes” i {SELECT} Erasing all messages 1 {MENU} (middle soft key) i {#}{3}{2}{5} 2 “Yes” i {SELECT} Voice memo Recording a voice memo You can use the base unit to leave a voice memo (voice message) for yourself or someone else (max. 3 minutes). Voice memos can be played back later with the same operation used to play back answering system messages.
TG5771_5776_5777.book Page 58 Friday, February 23, 2007 3:52 PM Answering System Remote operation Using a touch tone phone, you can call your phone number from outside and access the unit to listen to messages. The unit’s voice guidance prompts you to press certain dial keys to perform different operations. Important: L In order to operate the answering system remotely, you must first set a remote code (page 59). This code must be entered each time you operate the answering system remotely.
TG5771_5776_5777.book Page 59 Friday, February 23, 2007 3:52 PM Answering System Key Remote command {9} Stop recording/ playback*2 Answering system settings {0} Turn answering system off Remote code {*}{4} Erase currently playing message {*}{5} Erase all messages *1 If pressed within the first 5 seconds of a message, the previous message is played. *2 To resume operation, enter a remote command within 3 seconds, or the voice guidance starts.
TG5771_5776_5777.book Page 60 Friday, February 23, 2007 3:52 PM Answering System For Voice Mail service subscribers If you subscribe to a flat-rate service package that includes Caller ID, Call Waiting, Voice Mail, and unlimited local/ regional/long distance calls, please note the following: L To use the Voice Mail service provided by your telephone service provider rather than the unit’s answering system, turn off the answering system (page 54).
TG5771_5776_5777.book Page 61 Friday, February 23, 2007 3:52 PM Answering System Message alert Call screening You can select whether or not the message indicator on the handset slowly flashes blue when new messages are recorded (page 56). The default setting is “Off”. This feature allows you to monitor a message from the base unit and handset speakers when the answering system is recording the message. The default setting is “On”.
TG5771_5776_5777.book Page 62 Friday, February 23, 2007 3:52 PM Voice Mail Service minutes long, the handset may not indicate new messages. Using Voice Mail service Voice Mail is an automatic answering service offered by your telephone service provider. After you subscribe to this service, the telephone service provider’s Voice Mail system will answer calls for you when you are unavailable to answer the phone or when your line is busy.
TG5771_5776_5777.book Page 63 Friday, February 23, 2007 3:52 PM Multi-unit Operation Intercom Intercom calls can be made: – between the handset and base unit – between handsets Note: L If you receive an outside call while talking on the intercom, you hear 2 tones. To answer the call with the handset, press {OFF}, then press {C}. To answer the call with the base unit, press {SP-PHONE} 2 times. L You can locate a misplaced handset by paging it (handset locator).
TG5771_5776_5777.book Page 64 Friday, February 23, 2007 3:52 PM Multi-unit Operation Auto intercom/Room monitor This feature allows you to: – answer an intercom call without pressing any buttons on the handset. – listen to the sound in a room where the handset is located. Turning auto intercom on/off “Off” (Default): Turns this feature off. “On(Ringer On)”: When an intercom call is received, the handset rings 2 times then the speakerphone is automatically turned on.
TG5771_5776_5777.book Page 65 Friday, February 23, 2007 3:52 PM Multi-unit Operation Transferring calls Outside calls can be transferred between the handset and base unit, and between 2 handsets. L The outside call is being routed to the handset. Answering transferred calls Handset Press {C} to answer the page. Handset 1 During an outside call, press {INTERCOM} to put the call on hold. 2 3 Select the desired unit. i {CALL} 4 To complete the transfer, press {OFF}.
TG5771_5776_5777.book Page 66 Friday, February 23, 2007 3:52 PM Multi-unit Operation Conference calls The handset and base unit, or 2 handsets can have a conference call with an outside party. Handset 1 During an outside call, press {INTERCOM} to put the call on hold. 2 3 4 Select the desired unit. i {CALL} Note for handset and base unit: L One more extension can join a conference call. To join the conference call using the handset, press {C}. To join using the base unit, press {SPPHONE}.
TG5771_5776_5777.book Page 67 Friday, February 23, 2007 3:52 PM Multi-unit Operation Registering a handset The included handset and base unit are preregistered. If for some reason the handset is not registered to the base unit, register the handset. Important: L If you have already deregistered the handset, perform steps 2 and 3 only. 1 Handset: {MENU} (middle soft key) i {#}{1}{3}{0} 2 Base unit: Press and hold {INTERCOM} until the IN USE indicator flashes.
TG5771_5776_5777.book Page 68 Friday, February 23, 2007 3:52 PM Useful Information Additional accessories Sales and support information L To order replacement accessories, call 1-800-332-5368. L TTY users (hearing or speech impaired users) can call 1-866-605-1277. Wall mounting (optional) By purchasing the optional wall-mounting adaptor PQKL10078Z1, you can mount the base unit on a wall.
TG5771_5776_5777.book Page 69 Friday, February 23, 2007 3:52 PM Useful Information Error messages If the unit detects a problem, one of the following messages is shown on the display. Display message Cause/solution Busy L The called handset or base unit is in use. L Privacy mode is on for the call you tried to join (page 30). L Other units are in use and the system is busy. Try again later. Error!! L The handset’s registration has failed.
TG5771_5776_5777.book Page 70 Friday, February 23, 2007 3:52 PM Useful Information Display message Cause/solution No link to base. Move closer to base, try again. L The handset has lost communication with the base unit. Move closer to the base unit, and try again. L Unplug the base unit’s AC adaptor to reset the unit. Reconnect the adaptor and try again. L Raise the base unit antennas. L The handset’s registration may have been canceled. Re-register the handset (page 67).
TG5771_5776_5777.book Page 71 Friday, February 23, 2007 3:52 PM Useful Information Troubleshooting General use Problem Cause/solution The unit does not work. L Make sure the battery is installed correctly and fully charged (page 16). L Check the connections (page 15). L Unplug the base unit’s AC adaptor to reset the unit. Reconnect the adaptor and try again. L The handset has not been registered to the base unit. Register the handset (page 67). I cannot hear a dial tone.
TG5771_5776_5777.book Page 72 Friday, February 23, 2007 3:52 PM Useful Information Making/answering calls, intercom Problem Cause/solution w is displayed, but I cannot make a call. L The handset and base unit could not communicate for some reason, such as interference from other electrical appliances. Perform the following: – Move the handset and base unit away from other electrical appliances. – Move closer to the base unit. – Raise the base unit antennas. Static is heard, sound cuts in and out.
TG5771_5776_5777.book Page 73 Friday, February 23, 2007 3:52 PM Useful Information Caller ID Problem Cause/solution The handset does not display the caller’s name and/or phone number. L You have not subscribed to Caller ID service. Contact your telephone service provider to subscribe. L If your unit is connected to any additional telephone equipment such as a Caller ID box or cordless telephone jack, disconnect the unit from the equipment and plug the unit directly into the wall jack.
TG5771_5776_5777.book Page 74 Friday, February 23, 2007 3:52 PM Useful Information Problem Cause/solution I cannot dial the phone number edited in the caller list. L The phone number you dialed might have been edited incorrectly (for example, the long distance “1” or the area code is missing). Edit the phone number with another pattern (page 39). The 2nd caller’s information is not displayed during an outside call.
TG5771_5776_5777.book Page 75 Friday, February 23, 2007 3:52 PM Useful Information FCC and other information This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA. On the bottom of this equipment is a label that contains, among other information, a product identifier in the format US:ACJ----------. If requested, this number must be provided to the telephone company. L Registration No ............(found on the bottom of the unit) L Ringer Equivalence No. (REN)......
TG5771_5776_5777.book Page 76 Friday, February 23, 2007 3:52 PM Useful Information line, ensure the installation of this equipment does not disable your alarm equipment. If you have questions about what will disable alarm equipment, consult your telephone company or a qualified installer. This equipment is hearing aid compatible as defined by the FCC in 47 CFR Section 68.316. Privacy of communications may not be ensured when using this phone.
TG5771_5776_5777.book Page 77 Friday, February 23, 2007 3:52 PM Useful Information Some cordless telephones operate at frequencies that may cause interference to nearby TVs and VCRs. To minimize or prevent such interference, the base of the cordless telephone should not be placed near or on top of a TV or VCR. If interference is experienced, move the cordless telephone further away from the TV or VCR. This will often reduce, or eliminate, interference.
TG5771_5776_5777.book Page 78 Friday, February 23, 2007 3:52 PM Useful Information Specifications General Operating environment 5 °C – 40 °C (41 °F – 104 °F) Frequency 5.76 GHz – 5.84 GHz Base unit Dimensions Approx. height 55 mm x width 230 mm x depth 140 mm (25/32 inches x 91/16 inches x 51/2 inches) Mass (Weight) Approx. 420 g (0.93 lb.) Power consumption Standby: Approx. 2.1 W Maximum: Approx. 5.2 W Power output 200 mW (max.
TG5771_5776_5777.book Page 79 Friday, February 23, 2007 3:52 PM Useful Information Warranty PANASONIC CONSUMER ELECTRONICS COMPANY, DIVISION OF PANASONIC CORPORATION OF NORTH AMERICA One Panasonic Way, Secaucus, New Jersey 07094 PANASONIC PUERTO RICO, INC. San Gabriel Industrial Park, Ave. 65 de Infantería, Km. 9.
TG5771_5776_5777.book Page 80 Friday, February 23, 2007 3:52 PM Useful Information IF REPAIR IS NEEDED DURING THE LIMITED WARRANTY PERIOD THE PURCHASER WILL BE REQUIRED TO FURNISH A SALES RECEIPT/PROOF OF PURCHASE INDICATING DATE OF PURCHASE, AMOUNT PAID AND PLACE OF PURCHASE. CUSTOMER WILL BE CHARGED FOR THE REPAIR OF ANY UNIT RECEIVED WITHOUT SUCH PROOF OF PURCHASE.
TG5771_5776_5777.book Page 81 Friday, February 23, 2007 3:52 PM Useful Information Customer services Customer Services Directory Obtain Product Information and Operating Assistance; locate your nearest Dealer or Service Center; purchase Parts and Accessories; or make Customer Service and Literature requests by visiting our Web Site at: http://www.panasonic.com/help or, contact us via the web at: http://www.panasonic.
TG5771_5776_5777.
TG5771_5776_5777.
TG5771_5776_5777.book Page 84 Friday, February 23, 2007 3:52 PM If you need assistance with setup or operation 1 2 3 Visit our website: http://www.panasonic.com/help Contact us via the web at: http://www.panasonic.com/contactinfo Call us at: 1-800-211-PANA (1-800-211-7262) TTY users (hearing or speech impaired users) can call 1-877-833-8855. When you ship the product L Carefully pack your unit, preferably in the original carton. L Attach a letter, detailing the symptom, to the outside of the carton.