Operating Instructions

R A long beep sounds.
2 MOFFN
Unpairing a headset
You can cancel a pairing of the headset that is
stored to the base unit.
Handset
1 MMENUN#612
2 MbN: “Yes” a MSELECTN
R When the headset is unpaired, the
disappears from the base unit
display.
3 MOFFN
Operating a Bluetooth wireless
headset using a landline
Important:
R Refer to your headset operating instructions
for headset operations.
Answering landline calls with your
headset
To answer a landline call, press your
headset’s button referring to your headset
operating instructions.
When you finish talking, press your headset’s
button referring to your headset operating
instructions.
Note:
R If you cannot hang up the call using your
headset, press MZN on the base unit 2
times.
Switching between the base unit and
your headset
You can switch between the base unit and
your headset:
– during a landline call with the base unit
speakerphone.
– during an intercom call between the base
unit and handset.
– while listening to messages recorded on
the base unit answering system.
n To switch to your headset:
Press M
N on the base unit.
n To switch to the base unit:
Press MZN on the base unit.
Call sharing between your headset
and the handset
Important:
R To activate this feature, you should set call
sharing mode to on beforehand (page 46).
n While the handset is on a landline call:
To join the conversation with your headset,
press your headset’s button referring to
your headset operating instructions.
n While your headset is on a landline call:
To join the conversation with the handset,
press M
N.
Adjusting your headset receiver
volume
Base unit
Press MDN or MCN repeatedly while using your
headset.
Note:
R Depending on your headset, the receiver
volume may not be adjustable.
For assistance, please visit www.panasonic.com/support
61
Using Bluetooth® Devices
TGF37x(en)_1128_ver032.pdf 61 2014/11/28 16:08:42