TGE46x47x_QG(en).fm Page 1 Monday, November 16, 2015 5:01 PM Model No. KX-TGE463/KX-TG654SK/KX-TG684SK KX-TGE474/KX-TGE475 Quick Guide Connections Base unit 1 Connect the AC adaptor to the unit by pressing the plug firmly. 2 Fasten the cord by hooking it. 3 Connect the AC adaptor to the power outlet. 4 Connect the telephone line cord to the unit, then to the single-line telephone jack (RJ11C) until you hear a click. 5 A DSL/ADSL filter (not supplied) is required if you have a DSL/ADSL service.
TGE46x47x_QG(en).fm Page 2 Monday, November 16, 2015 5:01 PM Battery installation/Battery charging Charge for about 7 hours. 2 1 Note: L USE ONLY rechargeable Ni-MH batteries AAA (R03) size ( 1 ). L Do NOT use alkaline/manganese/Ni-Cd batteries. L Confirm correct polarities (S, T). L Follow the directions on the display to set up the unit. L Confirm “Charging” is displayed ( 2 ). Operating tips Soft keys By pressing a soft key, you can select the feature shown directly above it on the display.
TGE46x47x_QG(en).fm Page 3 Monday, November 16, 2015 5:01 PM Recording your greeting message of the answering system for the landline (Handset) You can record your own greeting message instead of using a pre-recorded greeting message. 1 {MENU}(3)2 s {r}: “Yes” s {SELECT} 2 After a beep sounds, hold the handset about 20 cm (8 inches) away and speak clearly into the microphone (2 minutes max.). 3 Press {STOP} to stop recording.
TGE46x47x_QG(en).fm Page 4 Monday, November 16, 2015 5:01 PM Link to cell Pairing a Bluetooth cellular phone 1 Base unit: Press and hold {CELL 1} or {CELL 2} for about 5 seconds. L After the corresponding CELL indicator on the base unit starts flashing, the rest of the procedure must be completed within 5 minutes. 2 Your cellular phone: While the corresponding CELL indicator is flashing, follow the instructions of your cellular phone to enter the pairing mode.
TGE46x47x_QG(en).fm Page 5 Monday, November 16, 2015 5:01 PM Link to cell Connecting/disconnecting the cellular phone (Handset) Auto connection to the Bluetooth devices (cellular phones) The unit connects to the Bluetooth devices at regular intervals if the connection is lost. To change the interval (default: “1 min”), see the operating instructions.
TGE46x47x_QG(en).fm Page 6 Monday, November 16, 2015 5:01 PM Basic operations Making/Answering calls (Handset) Making cellular calls 1 2 Dial the phone number. s {CELL} L When the cellular line only mode is set, you can also press {C}/{s} instead of {CELL}. L When only 1 cellular phone is paired, the unit starts dialing. When 2 cellular phones are paired: {r}: Select the desired cellular phone. s {SELECT} Making landline calls Dial the phone number.
TGE46x47x_QG(en).fm Page 7 Monday, November 16, 2015 5:01 PM Basic operations Phonebook (Handset) Adding entries 1 2 3 4 5 Making calls 1 2 {<} k s {MENU} {r}: “Add new entry” s {SELECT} Enter the party’s name (16 characters max.). s {OK} Enter the party’s phone number (24 digits max.). s {OK} {r}: Select the desired group. s {SELECT} 2 times s {OFF} L In step 3, you can switch the language for entering characters. ( s {r}: Select the desired language. s {OK} {<} k s {r}: Select the desired entry.
TGE46x47x_QG(en).fm Page 8 Monday, November 16, 2015 5:01 PM Using Bluetooth devices Copying phonebook entries from a Bluetooth cellular phone (phonebook transfer) You can copy phonebook entries from the paired cellular phones or other cellular phones (not paired) to the unit’s phonebook. 1 Handset: {MENU}(618 2 Handset: To copy from paired cellular phones: {r}: Select the desired cellular phone. s {SELECT} L Copied items are stored to the group (“Cell 1” or “Cell 2”) which the cellular phone is paired to.
TGE46x47x_QG(en).fm Page 9 Monday, November 16, 2015 5:01 PM Using Bluetooth devices Using a Bluetooth wireless headset (optional) for landline calls By pairing a Bluetooth headset to the base unit, you can have a hands-free conversation wirelessly for landline calls. L Only 2 Bluetooth devices can be used with the unit at the same time (for example, 2 cellular lines, or the headset and 1 cellular line). Pairing a headset to the base unit 1 Your headset: Set your headset to pairing mode.
TGE46x47x_QG(en).fm Page 10 Monday, November 16, 2015 5:01 PM Frequently asked questions Question Cause/solution Why is _ displayed? L The handset is too far from the base unit. Move closer. L The base unit’s AC adaptor is not properly connected. Reconnect AC adaptor to the base unit. L The handset is not registered to the base unit. Register it. 1 Handset: {MENU}(13) 2 Base unit: Press and hold {LOCATOR} or {HANDSET LOCATOR} for about 5 seconds.
