Operating Instructions

Preparation
11
Note:
L If you select a language you cannot read,
press {ih}, press {j/OK}, press {^} 3
times, press {>}, press {V} 2 times, press
{>}, press {V}, press {>}, select the
desired language, press {>}, then press
{ih}.
Dialling mode (tone/pulse)
Changing the dialling mode depending on
your telephone line service.
“Tone”: Select when you have a touch tone
service.
“Pulse”: Select when you have rotary or
pulse service.
1 {j/OK}
2 Press {^} or {V} to select “Base Unit
Setup”. i {>}
3 Press {^} or {V} to select “Call
Options”. i {>}
4 Press {^} or {V} to select “Dial Mode”.
i {>}
5 Press {^} or {V} to select the desired
setting. i {>} i {ih}
Date and time
1 {j/OK}
2 Press {^} or {V} to select “Handset
Setup”. i {>}
3 Press {^} or {V} to select “Time
Settings”. i {>} i Press {^} or
{V} to select “Set Date & Time”. i
{>}
4 Enter the current day, month, and year.
Example: 17 May, 2006
{1}{7} {0}{5} {0}{6}
5 Enter the current hour and minute.
Example: 3:30 PM
{0}{3} {3}{0} i Press {*} until
“03:30 PM” is displayed.
6 {j/OK} i {ih}
Note:
L To correct a digit, press {<} or {>} to
move the cursor, then make the
correction.
L The date and time may be incorrect after a
power failure. In this case, set the date
and time again.
TG7100-7120FX(e-e).book Page 11 Thursday, August 10, 2006 10:32 AM