Operating Instructions

Base Unit Settings
20
Call options
Setting call restriction
You can restrict selected handsets from
dialling certain numbers. You can assign up
to 6 phone numbers to be restricted, and
select which handsets will be restricted.
Storing area codes here will prevent the
restricted handsets from dialling any phone
number in that area code.
1 {j/OK} i “Base Unit Setup” i
{>}
2 “Call Options” i {>}
3 “Call Restrict” i {>}
4 Enter the base unit PIN (default:
“0000”).
5 Set which handsets will be restricted by
pressing the desired handset number.
L All the registered handset numbers
will be displayed.
L Flashing numbers indicate call
restriction is turned on for the
corresponding handset.
L To turn call restriction off for a handset,
press the number again. The number
will stop flashing.
6 {j/OK}
7 Select a memory location. i {>}
8 Enter the phone number or area code to
be restricted (8 digits max.). i
{j/OK} i {ih}
L To erase a restricted number, press
{C/T}.
Changing the unit’s region
setting/Resetting the base unit
1
{j/OK} i “Base Unit Setup” i
{>}
2 “Other Options” i {>}
3 “Country” i {>}
4 Select the desired country. i {>}
“EG”=countries except Czech and
Slovakia
“CZ”=Czech
“SK”=Slovakia
5 “Yes” i {j/OK} i {ih}
Note:
L The following items will be deleted or reset
to their default settings:
– Settings listed on page 19, 25, 30
– All SMS messages
– Caller list
L The following items will be retained:
– Date and time
– Repeater mode
– Recordings, including your greeting
message and caller messages (KX-
TG7120 only)
L If you select the desired country in step 4,
the following default settings will be
changed for the selected country’s default
settings:
– Message centre 1 and 2 (page 25)
– Recall time (page 19)
– Language (page 16)
– SMS on/off (page 25)
– Language used for answering system
announcements (KX-TG7120 only)
L After changing the unit’s region
setting/resetting the base unit, w will flash
on the handset momentarily. This is
normal. The handset can be used once w
stops flashing.
TG7100-7120FX(e-e).book Page 20 Thursday, August 10, 2006 10:32 AM