Operating Instructions

SMS (Short Message Service)
24
L Using the handset phonebook:
{k} i Select the handset
phonebook entry. i {j/OK} 2
times
L Using the caller list:
Press {^} or {V} to select the party.
i {j/OK} 2 times
L Using the redial list:
Press {R} repeatedly to select the
phone number. i {j/OK} 2 times
5 To save the message, select “Yes”. i
{>}
6 To send the message, press {>}.
L To cancel sending, press {ih}.
Note:
L This unit supports SMS messages of up to
612 characters, however, the maximum
number of characters you can send or
receive may be limited by your SMS
service provider/telephone company.
Consult your SMS service
provider/telephone company for details.
L If your message contains over 160
characters, the message is a long
message and “@@Long Message@@” is
displayed. Your service
provider/telephone company may treat
long messages differently from other
messages. Consult your service
provider/telephone company for details.
L If your phone is connected to a PBX, store
the PBX line access number (page 25).
Sending a saved message
1
{j/OK} i “SMS” i {>}
2 “Send List” i {>}
3 To read a saved message, press {^} or
{V} to select the message. i {j/OK}
4 To send the message, press {j/OK}.
i “Send” i {>}
5 Press and hold {C/T} to erase all
numbers, then continue from step 4,
“Writing and sending a new message”,
page 23.
Editing and sending a saved
message
1
{j/OK} i “SMS” i {>}
2 “Send List” i {>}
3 Press {^} or {V} to select the message.
i {j/OK}
4 {j/OK} i “Edit Message” i {>}
i Continue from step 3, “Writing and
sending a new message”, page 23.
Erasing saved messages
1
{j/OK} i “SMS” i {>}
2 “Send List” i {>}
3 Press {^} or {V} to select the message.
i {j/OK}
4 {j/OK} i “Erase” i {>}
L To erase all messages, select “Erase
All”. i {>}
5 “Yes” i {>} i {ih}
Receiving a message
When an SMS message is received:
– a tone is heard (if the handset ringer is
turned on)
– “Receiving SMS Message” is
displayed
– F is displayed
– the message indicator on the handset
flashes if the message alert feature (page
16) has been turned on
Reading a received message
1
{j/OK} i “SMS” i {>}
2 “Receive List” i {>}
TG7100-7120FX(e-e).book Page 24 Thursday, August 10, 2006 10:32 AM