Operating Instructions

Preparation
8
Connections
Base unit
When connecting the AC adaptor to the
base unit, a short beep will be heard. If it is
not heard, check the connections.
Charger (KX-TG7102 only)
Connect the AC adaptor to the charger and
route the cable as shown. The charger can
be mounted on the wall, if required.
Note:
L Never install telephone wiring during a
lightning storm.
L The AC adaptor must remain connected
at all times. (It is normal for the adaptor to
feel warm during use.)
L The AC adaptor should be connected to a
vertically oriented or floor-mounted AC
outlet. Do not connect the AC adaptor to a
ceiling-mounted AC outlet, as the weight
of the adaptor may cause it to become
disconnected.
Location
L For maximum distance and noise-free
operation, place your base unit:
– away from electrical appliances such as
TVs, radios, personal computers or
other phones.
– in a convenient, high and central
location.
Battery
installation/replacement
Important:
L Use only the included rechargeable
batteries noted on page 4, 5.
L When replacing batteries, we recommend
using the Panasonic rechargeable
batteries noted on page 4, 5.
1 Press the notch on the handset cover
firmly and slide it in the direction of the
arrow.
Use only the included AC
adaptor and telephone line
cord.
(220–240 V, 50 Hz)
To telephone
network
Hook
(220 – 240 V,
50 Hz)
Screws
25 mm
Hooks
Use only the included AC adaptor.
TG7100-7120FX(e-e).book Page 8 Thursday, August 10, 2006 10:32 AM