Owner manual

Programmable settings

Problem Cause/solution

The display is in a

language I cannot read.

R Change the display language (page 18).

I cannot register a handset

to a base unit.

R The maximum number of handsets (6) is already

registered to the base unit. Cancel unused

handset registrations from the base unit (page 48).

Battery recharge

Problem Cause/solution

The handset beeps and/or

flashes.

R Battery charge is low. Fully charge the batteries

(page 11).

I fully charged the batteries,

but

–

still flashes,

– is displayed, or

– the operating time

seems to be shorter.

R Clean the battery ends ( , ) and the charge

contacts with a dry cloth and charge again.

R It is time to replace the batteries (page 11).

Making/answering calls, intercom

Problem Cause/solution

is displayed. R The handset is too far from the base unit. Move

closer.

R The base unit’s AC adaptor is not properly

connected. Reconnect AC adaptor to the base unit.

R The handset is not registered to the base unit.

Noise is heard, sound cuts

in and out.

R You are using the handset or base unit in an area

with high electrical interference. Re-position the

base unit and use the handset away from sources

of interference.

R Move closer to the base unit.

R If you use a DSL/ADSL service, we recommend

connecting a DSL/ADSL filter between the base

unit and the telephone line jack. Contact your DSL/

ADSL provider for details.

For assistance, please visit http://www.panasonic.com/help

Useful Information