TG8021E(e)_QG.fm Page 1 Thursday, May 29, 2008 3:56 PM Model No. KX-TG8021E/KX-TG8022E KX-TG8023E/KX-TG8024E Quick Guide Connections Base unit “Click” Use only the supplied telephone line cord. Guide To telephone line DSL/ADSL filter (For DSL/ADSL service users) Plug Hook (220-240 V AC, 50 Hz) Press plug firmly. Plug Use only the supplied Panasonic AC adaptor PQLV207E. Guide Do not try to connect over the guide.
TG8021E(e)_QG.fm Page 2 Thursday, May 29, 2008 3:56 PM Battery installation/Battery charge Charge for about 7 hours. Base unit Rechargeable Ni-MH ONLY Charger *1 “Charging” is displayed. *1 KX-TG8022/KX-TG8023/ KX-TG8024 Note: L USE ONLY Ni-MH batteries AAA (R03) size. L Do NOT use Alkaline/Manganese/Ni-Cd batteries. Screen saver mode The backlight goes dark when on a call or turns off completely after 1 minute of inactivity if the handset is not on the base unit or charger.
TG8021E(e)_QG.fm Page 3 Thursday, May 29, 2008 3:56 PM Operating tips Using the navigator key Volume up {^} The handset navigator key can be used to navigate through menus and to select items shown on the display by pressing {^}, {V}, {<}, or {>}. To adjust the receiver or speaker volume, press {^} to increase the volume, or press {V} to decrease the volume repeatedly while talking. {<} {>} {V} Volume down Soft keys The handset features 3 soft keys.
TG8021E(e)_QG.fm Page 4 Thursday, May 29, 2008 3:56 PM Basic operations Making/Answering calls (Handset) Making calls Dial the phone number. i {C}/{s} Answering calls {C}/{s} To hang up {ih} To adjust the receiver/ speaker volume Press {^} or {V} repeatedly while talking. Making a call using the redial list j (right soft key) i {V}/{^}: Select the desired phone number.
TG8021E(e)_QG.fm Page 5 Thursday, May 29, 2008 3:56 PM Frequently asked questions Question Cause/solution Why is w flashing? L The handset is too far from the base unit. Move closer. L The base unit’s AC adaptor is not connected. Check the connections. L You are using the handset or base unit in an area with high electrical interference. Re-position the base unit and use the handset away from sources of interference. L The handset is not registered to the base unit. Register it (page 7).
TG8021E(e)_QG.fm Page 6 Thursday, May 29, 2008 3:56 PM Frequently asked questions Question Cause/solution What should I do to display caller information? L You must subscribe to a Caller ID service. Contact your service provider/telephone company for details. L The message “You must first subscribe to Caller ID.” will be displayed until you receive caller information after subscribing to a Caller ID service.
TG8021E(e)_QG.fm Page 7 Thursday, May 29, 2008 3:56 PM Registering a handset to a base unit The supplied handset and base unit are pre-registered. If for some reason the handset is not registered to the base unit, re-register the handset. Handset M 1 K (middle soft key) i N i M 2 {V}/{^}: “Registration” i M 2 times 3 {V}/{^}: Select a base unit number. i M Base unit Press and hold {x} for about 5 seconds, until the registration tone sounds. L The next step must be completed within 90 seconds.
TG8021E(e)_QG.fm Page 8 Thursday, May 29, 2008 3:56 PM Optional service (Caller ID) If you subscribe to a Caller ID service, 012345 – caller information will be displayed when a call is received, or when viewing missed calls. – you can identify who is calling by using different display colours and ringer tones (phonebook category). 012345 Sales and support information Customer Care Centre L For customers within the U.K.
TG8021E(e)_QG.
TG8021E(e)_QG.fm Page 10 Thursday, May 29, 2008 3:56 PM IMPORTANT If you have any problems operating this product, please try the following: 1 Reconnect AC adaptor. 2 Use supplied telephone line cord. 3 Use rechargeable Ni-MH batteries. (Alkaline batteries CANNOT be used.) Refer to Troubleshooting in Operating Instructions and FAQs in this Quick Guide. If you still have any problems, please call the Panasonic DECT Helpline 0844 844 3898 (U.K.
