Operating Instructions

Preparation
10
Battery installation and
replacement
Important:
L Use only the supplied rechargeable batteries
noted on page 4, 5.
L USE ONLY rechargeable Ni-MH batteries AAA
(R03) size.
L Do NOT use Alkaline/Manganese/Ni-Cd
batteries.
L Ensure correct polarities (S, T) when installing
the batteries.
L Wipe the battery ends (S, T) with a dry cloth.
L When installing the batteries, avoid touching the
battery ends (S, T ) or the unit contacts.
L When replacing batteries, we recommend using
the Panasonic rechargeable batteries noted on
page 4, 5.
1 Press the notch on the handset cover firmly
and slide it in the direction of the arrow.
2 Insert the batteries negative (T) end first.
Close the handset cover.
Battery charge
Place the handset on the base unit or charger
for about 8 hours before initial use.
When charging, the battery icon is shown as
follows.
When the batteries are fully charged, @ remains
on the display.
*1 The pictured model is KX-TG8070.
*2 KX-TG8072
Note:
L It is normal for the handset to feel warm during
charging.
L If you want to use the unit immediately, charge
the batteries for at least 15 minutes.
L Clean the charge contacts of the handset, base
unit, and charger with a soft, dry cloth once a
month. Clean more often if the unit is subject to
the exposure of grease, dust, or high humidity.
Rechargeable
Ni-MH ONLY
Base unit
*1
Charger
*2
@
?
/
TG8070-8090FX(e-e).book Page 10 Wednesday, August 1, 2007 9:26 AM