Operating Instructions

C Making/Answering Calls
13
Making calls
1 Lift the handset and dial the phone number.
L To correct a digit, press {DEL}.
2 {C}
3 When finished talking, press {i} or place the
handset on the base unit or charger.
Speakerphone
1 During a conversation, press {s} to turn on
the speakerphone.
L Speak alternately with the caller.
2 When finished talking, press {i}.
Note:
L For best performance, use the speakerphone in
a quiet environment.
L To switch back to the receiver, press {C}.
L Speakerphone cannot be used when the
headset is connected.
Adjusting the receiver or speaker volume
Press {^} or {V} while on a call.
Making a call using the redial list
The last 10 phone numbers dialled are stored in
the redial list (each 24 digits max.).
1 {V/R}
2 {^}/{V}: Select the desired number.
3 {C}
Editing/erasing/storing
1 {V/R}
2 {^}/{V}: Select the desired number. i
{MENU}
3 Proceed with the desired operation.
■ Editing a number before calling it:
{^}/{V}: “Edit and Call” i {OK} i
Press {<} or {>} to move the cursor. i
Edit the number. i {C}
■ Erasing numbers:
{^}/{V}: “Erase” or “Erase All” i
{OK} i {YES} i {i}
■ Storing a number into the handset
phonebook:
{^}/{V}: “Add Phonebook” i {OK} i
Enter a name (15 characters max.; page
30). i {OK} i {i}
Note:
L When editing:
– To erase a number, place the cursor to the
right of where you want to erase the number,
then press {DEL}.
– To insert a number, place the cursor where
you want to insert the number, then press the
appropriate dial key.
Pause (for PBX/long distance service
users)
A pause is sometimes required when making calls
using a PBX or long distance service.
Example: If you have to dial {9} before dialling
outside numbers manually, you will probably need
to pause after dialling {9} until you hear a dial tone.
1 Press {9} to reproduce a dial tone for outside
calls.
2 Press {0} for about 2 seconds to enter a
pause.
3 Dial the phone number. i {C}
Note:
L A 3 second pause is inserted each time {0} is
pressed for about 2 seconds. Repeat as needed
to create longer pauses.
Useful features during a call
Mute
While mute is turned on, you will be able to hear
the other party, but the other party will not be able
to hear you.
To mute your voice, press {</T}.
L o is displayed.
L To return to the conversation, press {</T}
again.
TG8070-8090FX(e-e).book Page 13 Wednesday, August 1, 2007 9:26 AM