Operating Instructions

Multi-unit Operation
28
L If you want to register the handset to other base
unit(s), follow “Registering a handset to a base
unit”, page 27.
L If the cancelled handset is registered to other
base unit(s), select the base unit by following
“Selecting a base unit”, page 27.
L If you do not use the handset, we recommend
removing the battery to prevent malfunctioning.
Intercom between handsets
Intercom calls can be made between handsets.
Example: When handset 1 calls handset 2
1 Handset 1:
{INT} i {^}/{V}: “Handset 2” (desired
handset number). i {OK}
2 Handset 2:
{C}
3 When finished talking, press {i}.
Transferring calls between
handsets, conference calls
Outside calls can be transferred between 2 people.
2 people can have a conference call with an
outside party.
Example: When handset 1 transfers a call to
handset 2
1 Handset 1:
During an outside call, press {INT}. i
{^}/{V}: “Handset 2” (desired handset
number). i {OK}
L The outside call will be put on hold.
L If there is no answer, press {i} to return to
the outside call.
2 Handset 2:
{C}
L Handset 2 can talk with handset 1.
3 Handset 1:
L To complete the call transfer, press {i}.
L To establish a conference call, press
{CONF}.
– Pressing {s} puts the external party on
hold, establishing an intercom call with
handset 2.
L To switch between handset 2 and the
outside call, press {SWAP}.
Note:
L You can also press {</T} to mute the
conference call. Press {</T} again to resume
the conference call.
TG8070-8090FX(e-e).book Page 28 Wednesday, August 1, 2007 9:26 AM