Operating Instructions

Preparation
10
Helpline Tel. No.: U.K. 0844 844 3898 R.O.I. 01289 8333
Connections
Connect the telephone line cord until it
clicks into the base unit and telephone
line jack (A). Connect the AC adaptor
cord (B) by pressing the plug firmly (C).
Base unit
Important:
L If you use a telephone line cord which
is not supplied, the unit may not work
properly.
Charger (KX-TG8202/KX-TG8222)
Note:
L Never install telephone wiring during a
lightning storm.
L The AC adaptor must remain
connected at all times. (It is normal for
the adaptor to feel warm during use.)
L The AC adaptor should be connected
to a vertically oriented or floor-
mounted AC outlet. Do not connect
the AC adaptor to a ceiling-mounted
AC outlet, as the weight of the adaptor
may cause it to become disconnected.
L The unit will not work during a
power failure. We therefore
recommend you also connect a
corded-type telephone (without AC
adaptor) to the same telephone line
using a T-adaptor. Your Panasonic
sales shop can offer you more
information about connection
possibilities.
Location
L For maximum distance and noise-free
operation, place your base unit:
– away from electrical appliances
such as TVs, radios, personal
computers, or other phones.
USE ONLY the supplied cord.
Hooks
To AC mains outlet
(220–240 V, 50 Hz)
To telephone line
C
C
B
A
USE ONLY the
supplied AC adaptor.
USE ONLY the supplied
AC adaptor (Smaller).
Hooks
To AC mains outlet
(220–240 V, 50 Hz)
B
C
C
TG8200_20E.book Page 10 Monday, June 18, 2007 9:03 AM