Operating Instructions

| Base Unit Settings
24
Helpline Tel. No.: U.K. 0844 844 3898 R.O.I. 01289 8333
Base unit settings
To customise the base unit using the handset:
1 " (centre of joystick)
2 Select | by pushing the joystick in any direction. i #
3 Push the joystick up or down to select the desired item in the base unit settings
menu. i #
4 Push the joystick up or down to select the desired item in the sub-menu. i #
5 Push the joystick up or down to select the desired setting then press # .
L This step may vary depending on the feature being programmed.
L To exit the operation, press {ih}.
Note:
L The current item or setting is highlighted on the display.
*1 KX-TG8220/KX-TG8222
*2 Change the recall time, if necessary, depending on the requirements of your
service provider/telephone company or PBX.
*3 If you change the PIN, please make note of your new PIN. The unit will not reveal
the PIN to you.
*4 If you forget your PIN, see page 50.
Menu Sub-menu Details (default setting)
Ringer Volume
*1
— For base unit (Medium)
Call Options Recall/Flash Recall time (“100 msec.”)
*2
Call Restrict page 25
Other Options Base Unit PIN Change base unit PIN (“0000”).
*3
– Enter the current 4-digit base
unit PIN.
*4
– Enter the new 4-digit base unit
PIN. i # i {ih}
Repeater Mode (“Off”): page 42
TG8200_20E.book Page 24 Monday, June 18, 2007 9:03 AM