Instruction Manual

Preparation
10
Displays
Display icons
Cordless camera KX-TGA914EX users
only
USB adaptor KX-TGA915EX users only
Display
icon
Meaning
w Within range of a base unit
L When flashing: Handset is
searching for base unit.
(out of range of base unit,
handset is not registered
to base unit, no power on
base unit)
x Handset is accessing base
unit. (intercom, paging,
changing base unit settings,
etc.)
k Handset is on an outside
call.
y Missed call
*1
(page 36)
u Answering system is on
(page 49) and/or new
messages have been
recorded. (page 49)
n Answering system is full.
d Answering system answers
calls with a greeting
message and caller
messages are not recorded.
(page 53)
% An audible call
announcement has been
recorded for this entry.
(page 23)
@ Battery strength
e Alarm is on. (page 27)
d Voice enhancer is set to high
or low tone. (page 17)
x Call privacy mode is on.
(page 17)
T Mute is on. (page 17)
~ Ringer volume is off.
(page 27)
f Night mode is on. (page 29)
h New SMS message
received
*2
(page 45)
j Displayed when writing an
SMS message.
*2
(page 42)
m SMS memory is full.
*2
z New voice mail message
received
*3
(page 38)
Line or answering system is
being used by another
handset or the base unit.
*1 Caller ID subscribers only
*2 SMS users only
*3 Voice mail users only
Display
icon
Meaning
8 Handset is connected to the
cordless camera.
L When flashing: Cordless
camera is paging the
handset because it
detected sound or its call
button was pressed.
Display
icon
Meaning
D Handset is in IP phone
mode.
L When flashing: An internet
call is being received.
9 Missed internet call
Display
icon
Meaning
TG9120_40_50EX(e).book Page 10 Monday, August 7, 2006 3:52 PM