Instruction Manual

m Handset Settings
32
Turning auto intercom on/off
This feature allows the handset to answer
intercom calls automatically when it is
called. You do not need to press {C}.
When this feature is set to “On”, the
monitoring handset for the baby monitor
feature (page 30) will also answer baby
monitor calls automatically.
1 J (centre of joystick) i m i L
2 “Other Options” i L
3 “Auto Intercom” i L
4 “On” or “Off” i L i {ih}
Calling code
If you need to dial a special calling code to
make calls using the telephone services of a
certain service provider/telephone company,
you can store the calling code in advance
and dial it by simply pressing and holding
the {*} while dialling a phone number.
Important:
L To use this feature you must store the
calling code in advance.
Example: If you store the calling code “098”
and press and hold {*} before dialling
“12345”, the unit dials “09812345”
automatically.
Assigning the calling code number
1 J (centre of joystick) i m i L
2 “Other Options” i L
3 “Calling Code” i L
4 Enter the desired calling code (24 digits
max.). i L
5 “Save” i L i {ih}
Making calls using a calling code
When dialling manually:
1 Lift the handset, then press and hold
{*}.
L The calling code you stored will be
displayed.
2 Dial the phone number manually.
3 {C} / {s} / L
When dialling from the redial list,
phonebook, one touch dial, or caller list:
1 Display the desired phone number in the
redial list, phonebook, one touch dial, or
caller list.
2 Press and hold {*}.
L The calling code you stored will be
displayed before the phone number.
3 {C} / {s} / L
TG9120_40_50EX(e).book Page 32 Monday, August 7, 2006 3:52 PM