Installation Manual Additional Digital Cordless Handset Model No. KX-TGA681E KX-TGA786E KX-TGA681 Thank you for purchasing a Panasonic product. This unit is an additional handset compatible with the following series of Panasonic Digital Cordless Phone: - KX-TG6811/KX-TG6821 (KX-TGA681) - KX-TG7861 (KX-TGA786) (The corresponding models are subject to change without notice.) You must register this handset with your base unit before it can be used.
Installation Accessory information Supplied accessories Accessory item/Part number Quantity Charger*1 1 AC adaptor/PNLV233EKX 1 Rechargeable batteries*2 2 Handset cover*3 1 *1 *2 *3 KX-TGA681: PNLC1042ZB (Black) KX-TGA786: PNLC1043ZB (Black) Please read the base unit’s operating instructions for replacement battery information. The handset cover comes attached to the handset. Note: R Please read the base unit’s operating instructions for additional/replacement accessories.
Installation Setting up Connections “Click” To power outlet Note: R Use only the supplied Panasonic AC adaptor PNLV233E. R The AC adaptor must remain connected at all times. (It is normal for the adaptor to feel warm during use.) Battery installation/Battery charging Important: R Use the supplied rechargeable batteries. For replacement, we recommend using the Panasonic rechargeable batteries noted in the base unit’s operating instructions. R Wipe the battery ends ( , ) with a dry cloth.
Installation Charge for about 7 hours. R When the batteries are fully charged, “Fully charged” is displayed. Rechargeable Ni-MH ONLY Confirm “Charging” is displayed. Note: R The handset display may show “Please wait for 1 minute.” when the handset is placed on the charger if it is not registered to the base unit. R If the batteries are fully charged, but the operating time seems to be shorter, clean the battery ends ( , ) and the charge contacts with a dry cloth and charge again.
Installation Note: is displayed, register the handset according to R If an error tone sounds, or if the base unit’s operating instructions. For your safety To prevent severe injury and loss of life/property, read this section carefully before using the product to ensure proper and safe operation of your product. WARNING Power connection R Completely insert the AC adaptor/power plug into the power outlet. Failure to do so may cause electric shock and/or excessive heat resulting in a fire.
Installation R Do not open or mutilate the batteries. Released electrolyte from the batteries is corrosive and may cause burns or injury to the eyes or skin. The electrolyte is toxic and may be harmful if swallowed. R Exercise care when handling the batteries. Do not allow conductive materials such as rings, bracelets, or keys to touch the batteries, otherwise a short circuit may cause the batteries and/or the conductive material to overheat and cause burns.
Installation Other information R Operating the product near electrical appliances may cause interference. Move away from the electrical appliances. CAUTION: Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions. Routine care R Wipe the outer surface of the product with a soft moist cloth. R Do not use benzine, thinner, or any abrasive powder.
Installation For business users in the European Union If you wish to discard electrical and electronic equipment, please contact your dealer or supplier for further information. Information on Disposal in other Countries outside the European Union These symbols (A, B, C) are only valid in the European Union. If you wish to discard these items, please contact your local authorities or dealer and ask for the correct method of disposal.
Notes 9 TGA681E(en-en)_1220_ver011.
Sales Department: Panasonic House, Willoughby Road, Bracknell, Berkshire, RG12 8FP © Panasonic Corporation 2012 *PNQX5892YA* *PNQX5892YA* PNQX5892YA TGA681E(en)_1125_ver111.