Operating instructions

8
Preparation
Displays
Display icons
*1 For KX-TG7120/KX-TG8120/KX-
TG9120 users only
*2 Voice mail users only
Connections
Connect the AC adaptor to the charger and
route the cable as shown. The charger can
be mounted on the wall, if required.
Note:
L The AC adaptor must remain connected
at all times. (It is normal for the adaptor to
feel warm during use.)
L The AC adaptor should be connected to a
vertically oriented or floor-mounted AC
outlet. Do not connect the AC adaptor to a
ceiling-mounted AC outlet, as the weight
of the adaptor may cause it to become
disconnected.
Location
L For maximum distance and noise-free
operation, place your base unit:
– away from electrical appliances such as
TVs, radios, personal computers or
other phones.
– in a convenient, high and central
location.
Display
icon
Meaning
w Within range of a base unit
L When flashing: Handset
is searching for base unit.
(out of range of base unit,
handset is not registered
to base unit, no power on
base unit)
L Handset is accessing base
unit. (intercom, paging,
changing base unit
settings, etc.)
k Handset is on an outside
call.
u Answering system is on.
*1
(page 19)
5 Battery strength
[2] Handset number (Standby
display setting, page 16)
0 New voice mail message
received
*2
L Line is being used by
another handset.
L Answering system is
being used by another
handset or the base
unit.
*1
(220–240 V,
50 Hz)
Screws
25 mm
Hooks
Use only the included AC adaptor.
TGA715FX_717FX(e-e).book Page 8 Wednesday, February 28, 2007 2:47 PM