Operating Instructions

Handset locator
Y
ou can locate a misplaced handset by
paging it.
1 Base unit: Press MLOCATORN or
MHANDSET LOCATORN.
R All registered handsets beep for 1
minute.
2 To stop paging:
Base unit:
Press MLOCATORN or MHANDSET
LOCATORN.
Handset:
n KX-TGE260 series: page 3
Press MOFFN.
n KX-TGE270 series: page 3
Press M
N,
then press MOFFN.
Using the Smart function key
Y
ou can also stop paging:
– KX-TGE260 series: press M
N.
–
KX-TGE270 series: press M
N,
then
press MOFFN.
Cell locator
T
his feature allows you to locate a misplaced
cellular phone by pressing the MLOCATES
CELLN button on the base unit and calling
your cellular phone. You must assign your
cellular phone’s phone number to the button
beforehand. Only 1 cellular phone number (24
digits max.) can be assigned.
Adding a phone number
1 MM
ENUN#248
R If you have already stored a cellular
phone number, the current number is
displayed.
2 Enter your cellular phone number. a
MSAVEN a MOFFN
Erasing the number
1 MMENUN#248
2 Press and hold MCLEARN until all digits
are erased. a MSAVEN a MOFFN
Calling the misplaced cellular phone
Base unit: MLOCATES CELLN
R To stop calling:
– KX-TGE260 series: press MLOCATES
CELLN again.
– KX-TGE270 series: press MZN.
Important:
R While the base unit is calling the cellular phone,
the outside line is used.
– KX-TGE260 series: Even if the cellular phone
answers, you cannot talk with the cellular
phone. To end the call, press MLOCATES
CELLN on the base unit.
– KX-TGE270 ser
ies: When the cellular phone
answers, you can talk with the cellular phone.
To end the call, press MZN on the base unit.
Charges may be incurred if the cellular phone
answers the call.
Intercom
I
ntercom calls can be made:
– between handsets
– between a handset and the base unit
*1
*1 KX-TGE270 series: page 3
Note:
R When paging unit(s), the paged unit(s)
beeps for 1 minute.
R If you receive an outside call while talking
on the intercom, the interrupt tone sounds
(page 41).
– To answer the call with the handset,
press MOFFN, then press the
corresponding line key.
– To answer the call with the base unit,
press MZN, then press the corresponding
line key.
*1
*1 KX-TGE270 series: page 3
For assistance, please visit http://www.panasonic.com/help
31
Locator/Intercom
TGE26x_27x(en)_0123_ver110.pdf 31 2015/01/23 9:57:42