Operating Instructions

Other programming
Changing the handset name
T
he default handset name is “Handset 1” to
“Handset 3”. You can customise the name
of each handset (“Bob”, “Kitchen”, etc.). This is
useful when you make intercom calls between
handsets. To display the handset name in
standby mode, turn on the handset name
display feature (page 33).
1 MMENUN#104
2 Enter the desired name (10 characters
max.).
3 MOKN a M
N
Displaying the handset name
Y
ou can select whether or not the handset
name is displayed in standby mode. The
default setting is “Off”.
1 MMENUN#105
2 MbN: Select the desired setting. a MOKN
a M
N
Call restriction
You can restrict selected handsets from
dialling certain numbers. You can assign up to
6 phone numbers to be restricted, and select
which handsets are to be restricted. Storing
area codes here prevents the restricted
handsets from dialling any phone number in
that area code.
1 MMENUN#256
2 Enter the base unit PIN (default: “0000”).
R If you forget your PIN, see page 47.
3 Select the handsets to be restricted by
pressing 1 to 3.
R All handsets registered to the base unit
are displayed.
R “ ” is displayed next to the selected
h
andset numbers.
R To cancel a selected handset, press
the same dial key again. “
”
d
isappears.
4 MO
KN
5 MbN: Select a memory location. a MOKN
6 Enter the phone number or area code to
be restricted (8 digits max.). a MOKN a
M
N
Enhancing security for phone
c
alls
You can increase the security of phone
conversations by setting this feature to
“Enhanced”. When “Enhanced” is selected,
is displayed. The default setting is
“N
ormal”.
1 MMENUN#729
2 MbN: Selected the desired setting. a MOKN
3 M
N
Note:
R If you set repeater mode to “On”
(page 34):
– Security is set to “Normal” and is
displayed.
– “Security” is not displayed in the
display menu (page 27).
R When enhanced security is enabled, sound
may cut in and out during conversations.
Changing the base unit PIN
I
mportant:
R If you change the PIN (Personal
Identification Number), please make note of
your new PIN. The unit will not reveal the
PIN to you. If you forget your PIN, see
page 47.
1 MMENUN#132
2 Enter the current 4-digit base unit PIN
(default: “0000”).
3 Enter the new 4-digit base unit PIN. a
MOKN
4 MbN: “Yes” a MOKN a M
N
Helpline Tel. No.: U.K. 0344 844 3899 Ireland 01289 8333
33
Programming
TGE72xE_0221_ver005.pdf 33 2019/02/21 14:47:46