Operating Instructions

– A
ndroid phone: Bluetooth must be
turned on.
– Android phone: [Application Alerts
manager]
*1
must be turned on.
– Handset or base unit: “Alert On/
Off” must be turned on (page 58).
R If this feature does not work, turn on your
device’s Bluetooth feature, unplug the base
unit’s AC adaptor, and then reconnect it.
*1 Turning on [Application Alerts
manager]
Use the following procedure after
installing the Link to Cell app.
Android 2.x: Open your device’s
[Settings] app. a Tap [Accessibility].
a Turn on the [Accessibility] and
[Application Alerts manager]
checkboxes.
Android 4.x: Open your device’s
[Settings] app. a Tap [Accessibility].
a Turn on [Application Alerts
manager].
Requirements
R A
n Android device (Android 2.1 or later)
Text message (SMS) alert
For iPhone
®
and BlackBerry
®
users
This feature alerts you on your DECT phone
w
hen your paired cellular phone receives SMS
messages. The Link to Cell app is not required
for iPhone and BlackBerry users.
Important:
R Your cellular phone must support MAP
(Message Access Profile) specification.
R For further information, refer to the
instructions on web page listed below:
www.panasonic.net/pcc/support/tel/sms/
R To use this feature, the following settings
are required:
– iPhone and BlackBerry Phone:
Bluetooth must be turned on.
– Handset or base unit: “Alert On/
Off” must be turned on (page 58).
R I
f this feature does not work, turn on your
device’s Bluetooth feature, unplug the base
unit’s AC adaptor, and then reconnect it.
Alert settings for your
D
ECT phone
If your cellular phone is paired to the base unit
and receives notifications, the handset and/or
base unit can alert you:
– by briefly displaying a message
– by announcement (English only)
– by sounding alert tones
Important:
R For Android users: Use the Link to Cell app
to enable the desired alerts (page 57).
Turning alert on/off
O
nce this feature is turned on, it will alert you
on the handset and base unit when your
cellular phone receives notifications.
– “On” (default): The handset and/or base
unit alert you.
– “Off”: The handset and/or base unit do
not alert you.
You can configure this setting using either the
base unit or one of the handsets.
Handset / Base unit
1 F
or CELL 1: MMENUN#6101
For CELL 2: MMENUN#6102
2 MbN: Select the desired setting. a
MSAVEN
3 Proceed with the operation for your unit.
Handset: MOFFN
Base unit: MEXITN
Note:
R In step 1, you can also enter the “Alert
settings” menu by pressing and holding
MAPP ALERTSN on the base unit.
Setting the voice alert
Y
ou can turn on/off the voice alert.
– “On” (default): The handset and/or base
unit notify you by voice announcement.
58
For assistance, please visit http://shop.panasonic.com/support
Using Bluetooth® Devices
TGF37x_OI(en-en)_0721_ver110.pdf 58 2015/07/22 13:32:27