Operating Instructions

R A
long beep sounds.
2 MOFFN
Unpairing a headset
Y
ou can cancel a pairing of the headset that is
stored to the base unit.
Handset
1 MM
ENUN#612
2 MbN: “Yes” a MSELECTN
R When the headset is unpaired, the
disappears from the base unit
display.
3 MOFFN
Operating a Bluetooth wireless
h
eadset using a landline
Important:
R Refer to your headset operating instructions
for headset operations.
Answering landline calls with your
h
eadset
To answer a landline call, press your
headset’s button referring to your headset
operating instructions.
When you finish talking, press your headset’s
button referring to your headset operating
instructions.
Note:
R If you cannot hang up the call using your
headset, press MZN on the base unit 2
times.
Switching between the base unit and
y
our headset
You can switch between the base unit and
your headset:
– during a landline call with the base unit
speakerphone.
– during an intercom call between the base
unit and handset.
– while listening to messages recorded on
the base unit answering system.
n T
o switch to your headset:
Press M
N
on the base unit.
n To switch to the base unit:
Press MZN on the base unit.
Call sharing between your headset
a
nd the handset
Important:
R To activate this feature, you should set call
sharing mode to on beforehand (page 45).
n While the handset is on a landline call:
To join the conversation with your headset,
press your headset’s button referring to
your headset operating instructions.
n While your headset is on a landline call:
To join the conversation with the handset,
press M
N.
Adjusting your headset receiver
v
olume
Base unit
P
ress MDN or MCN repeatedly while using your
headset.
Note:
R Depending on your headset, the receiver
volume may not be adjustable.
60
For assistance, please visit http://shop.panasonic.com/support
Using Bluetooth® Devices
TGF37x_OI(en-en)_0721_ver110.pdf 60 2015/07/22 13:32:27