Operating Instructions

– 9 –
Using a Bluetooth wireless headset (optional) for landline calls
By pairing a Bluetooth headset to the base unit, you can have a hands-free conversation wirelessly
for landline calls.
L Only 2 Bluetooth devices can be used with the unit at the same time (for example, 2 cellular
lines, or the headset and 1 cellular line).
Pairing a headset to the base unit
1 Your headset:
Set your headset to pairing mode.
L Refer to your headset operating instructions.
2 Handset:
{MENU}(621
1 Pair using the handset.
2 Paring
3 If your headset PIN is “0000”, go to step 4.
If your headset PIN is other than “0000”, press {CLEAR}, then enter your headset PIN.
L Typically, default PIN is “0000”. Refer to the headset operating instructions.
4 Press {OK}, then wait until a long beep sounds. s {OFF}
L When is displayed on the base unit, the headset is available for use.
Operating a Bluetooth wireless headset using a landline
Refer to your headset operating instructions for headset operations.
N Answering landline calls with your headset
To answer a landline call, press your headset’s button referring to your headset operating
instructions.
When you finish talking, press your headset’s button referring to your headset operating
instructions.
L If you cannot hang up the call using your headset, press {s} on the base unit 2 times.
N Switching between the base unit and your headset
You can switch between the base unit and your headset:
 during a landline call with the base unit speakerphone.
 during an intercom call between the base unit and handset.
 while listening to messages recorded on the base unit answering system.
To switch to your headset:
Press {} on the base unit.
To switch to the base unit:
Press {s} on the base unit.
Using Bluetooth devices
2
1
TGF37x_QG(en).fm 9 ページ ２０１５年７月１５日 水曜日 午前１１時３６分