Operating Instructions

Making cellular calls
Important:
R The unit cannot be used to talk on 2 cellular
lines at the same time.
R Only 1 Bluetooth device can be used with the
unit at a time
*1
.
R Before making calls, confirm that the
corresponding
on the handset is displayed
(page 14).
*1 You cannot use a Bluetooth headset to talk on
a cellular line.
1 Lift the handset and then dial the phone
number.
R To correct a digit, press MCLEARN.
2 MCELLN
R The unit starts dialing immediately in the
following situations.
– Only 1 cellular phone is paired.
– A specific line is set to make cellular calls
(page 20).
Go to step 4.
3 MbN: Select the desired cellular phone. a
MSELECTN
4 When you finish talking, press MOFFN or place
the handset on the charger.
Note:
R To switch to the speaker, press MZN.
To switch back to the receiver, press MZN/M
N.
R In step 1, you can store the dialed phone
number to the phonebook by pressing and
holding MFN W for a few seconds.
Adjusting the receiver or speaker volume
Press MDN or MCN repeatedly while talking.
Note:
R The receiver
*1
or speaker volume you set is
kept for each line (landline and cellular lines).
*1 If the receiver volume is set to level 5 (max.), it
will be changed to level 4 in the next call.
Making a call using the redial list
The last 5 phone numbers dialed are stored in the
redial list (48 digits max. each).
1 MEN REDIAL
2 MbN: Select the desired entry.
3 MCELLN
R The unit starts dialing immediately in the
following situations.
– Only 1 cellular phone is paired.
– A specific line is set to make cellular calls
(page 20).
4 MbN: Select the desired cellular phone. a
MSELECTN
Erasing a number in the redial list
n When a cellular phone is paired:
1 MEN REDIAL
2 MbN: Select the desired entry. a MMENUN
3 MbN: “Erase” a MSELECTN
4 MbN: “Yes” a MSELECTN a MOFFN
n When a cellular phone is not paired:
1 MEN REDIAL
2 MbN: Select the desired entry. a MERASEN
3 MbN: “Yes” a MSELECTN a MOFFN
Making landline calls
1 Lift the handset and then dial the phone
number.
R To correct a digit, press MCLEARN.
2 Press M N to make the call.
R To make the call using the speakerphone,
press MZN.
3 When you finish talking, press MOFFN or place
the handset on the charger.
Note:
R To switch to the speaker, press MZN.
To switch back to the receiver, press MZN/M
N.
R In step 1, you can store the dialed phone
number to the phonebook by pressing and
holding MFN W for a few seconds.
Making a call using the redial list
The last 5 phone numbers dialed are stored in the
redial list (48 digits max. each).
1 MEN REDIAL
2 MbN: Select the desired entry.
3 Press M
N or MZN.
For assistance, please visit http://shop.panasonic.com/support
21
Making/Answering Calls Using the Handset