Operating Instructions

*11 This tone lets you know when you receive an outside call while you are on another line or an
intercom call. If you select “On”, the tone sounds 2 times.
*12 This setting is available when you have the key detector (KX-TGA20). Read the installation manual
for more information on the key detector.
*13 For models with supplied key detectors, the display shows “1:Detector1”.
*14 If you register 2 or more key detectors.
*15 Handset
*16 Base unit
*17 If you subscribe to a Caller ID service and want to view the caller’s information after lifting up the
handset to answer a call, turn off this feature.
*18 The flash time depends on your telephone exchange or host PBX. Contact your PBX supplier if
necessary. The setting should stay at “700 ms” unless pressing MFLASHN fails to pick up the
waiting call.
*19 Generally, the line mode setting should not be changed. This setting automatically maintains receiver
volume at the proper level depending on the current telephone line condition. Set the line mode to
“A” if telephone line condition is not good.
Alarm
An alarm sounds at the set time for 1 minute and
is repeated 5 times at 5 minute intervals (snooze
function). A text memo can also be displayed for
the alarm. A total of 3 separate alarm times can be
programmed for each handset. You can set one of
3 different alarm options (once, daily, or weekly)
for each alarm time.
Important:
R Make sure the unit’s date and time setting is
correct (page 15).
Handset
1 MMENUN#720
2 MbN: Select the desired alarm. a MSELECTN
3 MbN: Select the desired alarm option. a
MSELECTN
“Off” Turns alarm off. Go to step 10.
“Once” An alarm sounds once at the
set time.
“Daily” An alarm sounds daily at the set
time. Go to step 5.
“Weekly” Alarm sounds weekly at the set
time(s).
4 Proceed with the operation according to your
selection in step 3.
n Once:
Enter the desired month and date. a MOKN
n Weekly:
MbN: Select the desired day of the week and
press MSELECTN. a MOKN
5 Set the desired time.
6 *: Select “AM” or “PM”. a MOKN
7 Enter a text memo (10 characters max.). a
MOKN
8 MbN: Select the desired alarm tone. a
MSELECTN
R We recommend selecting a different ringer
tone from the one used for outside calls.
9 MbN: Select the desired snooze setting. a
MSAVEN
10 MSELECTN a MOFFN
Note:
R Press MSTOPN to stop the alarm completely.
R When the handset is in use, the alarm will not
sound until the handset is in standby mode.
R Press any dial key or MSNOOZEN to stop the
sound but keep the snooze function activated.
R If you want to make an outside call when the
snooze function is activated, please stop the
snooze function before making the call.
Silent mode
Silent mode allows you to select a period of time
during which the handset and/or base unit will not
ring for outside calls. This feature is useful for time
periods when you do not want to be disturbed, for
example, while sleeping. Silent mode can be set
for each unit.
52
For assistance, please visit http://shop.panasonic.com/support
Programming