Operating Instructions

Problem Cause/solution

The unit answers an incoming

call on its own.

R This situation might happen due to a false detection of ambient

noise (dog barking, TV sound, etc.). Move the unit further away

from the noise sources.

R If you are using other telephone that has Talking Caller ID

feature turned on, it may also trigger false detection. Turn the

Talking Caller ID feature off on the other telephone.

R To minimize false detection, decrease the sensitivity level of the

answer by voice command (page 30, 50).

I cannot make long distance calls. R Make sure that you have long distance service.

I cannot use voice paging. R You cannot use voice paging if other units are in use.

Call block

Problem Cause/solution

The dedicated key for

Telemarketing call block is not

displayed.

R While on the charger, the MTELE.BLK.N key is not available. Lift

the handset from the charger.

R If the Auto talk feature is set to on, the call is answered

automatically when the handset is lifted from the charger during

an incoming call. Turn off the auto talk feature (page 50).

Caller ID/Talking Caller ID

Problem Cause/solution

Caller information is not displayed. R You must subscribe to Caller ID service. Contact your phone

service provider for details.

R If your unit is connected to any additional telephone equipment

such as a Caller ID box or cordless telephone line jack, plug the

unit directly into the wall jack.

R If you use a DSL/ADSL service, we recommend connecting a

DSL/ADSL filter between the base unit and the telephone line

jack. Contact your DSL/ADSL provider for details.

R The name display service for landline calls may not be available

in some areas. Contact your phone service provider for details.

R Other telephone equipment may be interfering with this unit.

Disconnect the other equipment and try again.

Caller information is displayed or

announced late.

R Depending on your phone service provider, the unit may display

or announce the caller’s information at the 2nd ring or later.

R Move closer to the base unit.

For assistance, please visit http://shop.panasonic.com/support

Useful Information