Operating Instructions

Problem Cause/solution
Caller information is not
announced.
R The ringer volume for landline is turned off. Adjust the ringer
volume (page 22, 27, 48).
R The ringer volume for cellular line is turned off. Adjust the ringer
volume (page 22, 27, 46).
R The unit which is not selected to ring for cellular calls does not
announce caller information. To change the selection, see
page 18.
R The Talking Caller ID feature is turned off. Turn it on (page 48).
R The ring as cell mode is set to “On (without Talking
CID)”. To change the mode, see page 18.
R The number of rings for the answering system is set to “2
rings” or “Toll saver”. Select a different setting (page 71).
R Your unit does not announce caller information while the other
devices such as headset or handsets are engaged in a call.
The caller list/incoming phone
numbers are not edited
automatically.
R The Caller ID number auto edit feature is turned off. Turn it on
and try again (page 50).
R You need to call back the edited number to activate Caller ID
number auto edit.
I cannot dial the phone number
edited in the caller list.
R The phone number you dialed might have been edited
incorrectly (for example, the long distance “1” or the area code
is missing). Edit the phone number with another pattern
(page 58).
Time on the unit has shifted. R Incorrect time information from incoming Caller ID changes the
time. Set the time adjustment to “Manual” (off) (page 48).
The 2nd caller’s information is not
displayed during an outside call.
R In order to use Caller ID, call waiting, or Call Waiting Caller ID
(CWID), you must first contact your phone service provider and
subscribe to the desired service.
After subscribing, you may need to contact your phone service
provider again to activate this specific service, even if you
already subscribed to both Caller ID and Call Waiting with Caller
ID services (CWID).
Using Bluetooth devices
Problem Cause/solution
I cannot copy phonebook entries
from a cellular phone.
R Confirm that the cellular phone supports Bluetooth wireless
technology.
R Confirm that the cellular phone supports the Phone Book
Access Profile (PBAP) or Object Push Profile (OPP)
specification.
R If the cellular phone is already connected to another Bluetooth
device such as a Bluetooth headset, turn the device off or
disconnect it from the cellular phone.
R Someone is using a cellular line or headset. Try again later.
R Turn the cellular phone off, then turn it on and try again.
R If an entry is already stored in the unit’s phonebook, the entry
cannot be copied even by selecting another group.
R iPhone does not support individual phonebook copy.
For assistance, please visit http://shop.panasonic.com/support
81
Useful Information