Operating Instructions

2 MbN: S
elected the desired setting. a MOKN
3 M
N
N
ote:
R If you set repeater mode to “On”
(page 45):
– Security is set to “Normal” and
is
displayed.
– “Security” is not displayed in the
display menu (page 37).
R When enhanced security is enabled, sound
may cut in and out during conversations.
Changing the base unit PIN
I
mportant:
R If you change the PIN (Personal
Identification Number), please make note of
your new PIN. The unit will not reveal the
PIN to you. If you forget your PIN, see
page 63.
1 MMENUN (right soft key) #132
2 Enter the current 4-digit base unit PIN
(default: “0000”).
3 Enter the new 4-digit base unit PIN. a
MOKN
4 MbN: “Yes” a MOKN a M
N
Increasing the range of the base
u
nit
You can increase the signal range of the base
unit by using a DECT repeater. Please use
only the Panasonic DECT repeater noted on
page 4. Contact your Panasonic dealer for
details.
Important:
R Before registering the repeater to this base
unit, you must turn the repeater mode on.
R Do not use more than one repeater at a
time.
Setting the repeater mode
1 MM
ENUN (right soft key) #138
2 MbN: Select the desired setting. a MOKN
a M
N
Registering the DECT repeater
(
KX-A405/KX-A406) to the base unit
Note:
R Please use a repeater that has not yet been
registered to another unit. If the repeater is
registered to another unit, deregister it first,
referring to the Installation Guide for the
DECT repeater.
1 Base unit:
Press and hold MLOCATORN for about 5
seconds.
2 DECT repeater:
Connect the AC adaptor, then wait until
the
indicator and indicator light
g
reen.
3 Base unit:
To exit the registration mode, press
MLOCATORN.
Helpline Tel. No.: U.K. 0344 844 3899 Ireland 01289 8333
45
Programming
TGH26xE_(en)_0203_ver120.pdf 45 2017/02/03 14:07:09