Operating Instructions

Alarm (default: On)
This feature can be set for each unit.
1 For handset: MMENUN#278
2 MbN: Select the desired setting and press MSELECTN.
R
is displayed next to enabled items.
R To disable an item, select it and press MSELECTN again.
d
isappears.
3 MSAVEN a MOFFN
Using assistive listening devices
I
f you use hearing aids that are compatible with a neckloop, you can
connect your neckloop to a handset and enjoy hands-free conversations.
When talking on the phone, you can speak using the neckloop’s
microphone or the handset’s microphone depending on the neckloop’s
features and the handset’s settings.
Hearing aids that are equipped with a telecoil (T-coil)
Audio neckloops with a 3-pole, 2.5 mm plug
Audio neckloops with a 3-pole, 3.5 mm plug
*1
*1 In this case, a 3-pole 3.5 mm to 3-pole 2.5 mm adaptor is required.
To use with a T-coil-equipped hearing aid
1 S
et your hearing aid to the "T" setting.
R Refer to your hearing aid’s operating instructions for details.
2 Hold the handset near your hearing aid when talking.
To use a neckloop
W
hen using a neckloop with the handset, you can speak using the
neckloop’s microphone or using the handset’s microphone.
Important:
R You must set the headset type before use (page 20).
1 Connect the neckloop to the headset jack on the side of the handset.
For a
ssistance, please visit http://shop.panasonic.com/support
19
Accessibility
TGMA44_45(en)_0426_ver021.pdf 19 2016/04/26 10:11:32