Installation Instructions

6 7
Observe the laws concerning the installation of the appliance.
For more details on cutout, see page 11.
Min. 51 mm clearance
from cutout to rear wall
Max. 330 mm
depth of cabinets
Min. 51 mm clearance
from cutout to side wall
Cutout
Min. 762 mm clearance
from the top of the cooktop
to the bottom of the cabinets
( 4 pieces )
Clamp
Accessories
CAUTION: Failure to follow these instructions may cause
injury or property damage.
- Use heat resistant materials for the
countertop. However, do not use
varnished materials as they might
get discoloured. The material of the
countertop should have heat resistance
equal to or exceeding “laminated
thermosetting high-pressure decorative
sheets”. If the materials are not heat
resistant, they may get deformed or
cause a re.
Safety Precautions
English
Installation Location