Operating Instructions Network Operation Manual LCD Projector Model No. PT-LB2E/LB2EA/LB2U PT-LB1E/LB1EA/LB1U AUTO SETUP MENU RETURN ENTER FREEZE COMPUTER AV MUTE VIDEO DEFAULT FUNCTION INDEX- WIN.
Contents Request Regarding Security · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 3 What you can do· · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 3 Check your computer· · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
Request Regarding Security When using this product, security breaches of the type described below are conceivable. •• Leakage of your private information via this product •• Illegal operation of this product by a malicious third-party •• Harm to or cessation of operation of this product by a malicious third-party Be sure to implement sufficient security measures. •• Set passwords, and limit the users that are permitted login access. •• Make sure the password is as hard to guess as possible.
Check your computer Necessary environment for computers to be connected •• First, check your computer to see whether or not it has a wired LAN function. LAN : “Glossary” (See page 18) •• Before connecting the computer to the projector, be sure to check the following settings. Check 1 For LAN cable •• Is the cable properly connected? •• Use LAN cable that is compatible with category 5 or above.
Network setting of the projector When making a connection between a computer and a projector with settings other than the default settings, perform the procedure below to display the menu required when changing the initial settings. Displaying the NETWORK menu 11 Press the [MENU] button on the projector. The main menu appears.
Network setting of the projector (cont.) NETWORK Wired LAN settings You can make detailed wired LAN settings. 11 Select [WIRED LAN] in the NETWORK menu and press the [ENTER] button. WIRED DETAILED SETUP OFF DHCP SELECT IP ADDRESS 192.168. 10.100 SUBNETMASK 255.255.255. DEFAULT GATEWAY 192.168. 10. 1 0 CANCEL OK CANCEL DHCP ON: If a DHCP server exists in the network to which the projector is connected, the IP address will automatically be acquired.
Network setting of the projector (cont.) NAME CHANGE You can change the projector name on the network. 11 Select [NAME CHANGE] in the NETWORK menu and press the [ENTER] button. PICTURE WIRED LAN POSITION NAME CHANGE LANGUAGE NETWORK CONTROL DISPLAY OPTION PROJECTOR SETUP ON STATUS INITIALIZE SECURITY NETWORK RETURN SELECT ENTER FUNCTION 22 33 Select characters with the [◄►▲▼] buttons and press the [ENTER] button to enter the projector name.
Network setting of the projector (cont.) STATUS Your current settings appear. Select [STATUS] in the NETWORK menu and press the [ENTER] button. PICTURE WIRED LAN POSITION NAME CHANGE LANGUAGE NETWORK CONTROL DISPLAY OPTION PROJECTOR SETUP ON STATUS INITIALIZE SECURITY NETWORK RETURN SELECT ENTER FUNCTION The status of the following will appear.
Using WebBrowser Control a projector through the WebBrowser of a computer. It is called “WEB Control”. (The example is when using Microsoft Internet Explorer.) Before using the WEB control Connect the projector and a computer with a LAN cable. (See page 4) Projector settings Turn [ON] the [NETWORK CONTROL] in the NETWORK menu. 11 22 Select [NETWORK CONTROL] in the NETWORK menu. Select [ON] with the [◄►] buttons. ON : This enables control on the WebBrowser. OFF : This disables control on the WebBrowser.
Using WebBrowser (cont.) Enabling JavaScript If JavaScript has been set to disable, enable it. 11 Open window. 22 Click the [Security] tab and set the security level to [Default Level], or select [Custom Level] and check the [Enable] checkbox under [Active scripting]. Click [Start] → [Control Panel] → [Network and Internet Connections] → [Internet Option]. Accessing from the WebBrowser 11 Start up the WebBrowser, and enter the IP address set to the projector.
Using WebBrowser (cont.) Monitor information window This page indicates the projector status. To access this page from other pages, click [Status] in the main menu (at the left of the window). Projector status On this window, click the [Projector status] tab. Network status On this window, click the [Network status] tab. The monitor information is refreshed at fixed intervals, but the current exact information can be checked by clicking [View] → [Refresh].
Using WebBrowser (cont.) Projector control window You can make various projector settings. If you migrate from other page, click [Projector control] in the main menu (at the left of the window). Basic control window On this window, click the [Basic control] tab. Advanced control window On this window, click the [Advanced control] tab. Connection with the projector may not be possible immediately after the power is turned on. In this case wait a bit and then make the connection again.
Using WebBrowser (cont.) 33 Complete the detailed settings and click [Next]. 44 Click [Submit]. When [Next] is clicked, the next page appears, enabling you to complete the detailed settings as desired. After all required items have been entered, a confirmation window appears. The settings will be registered. If you have changed the LAN settings that are currently in use, the connection may break off. Adjust clock Click [Detailed set up] → [Adjust clock] in the menu.
Using WebBrowser (cont.) E-mail set up You can specify two email recipients. Click [Detailed set up] → [E-mail set up] in the menu. •• [MAIL SERVER] ENABLE : Enable or disable email transmission. SMTP SERVER NAME : Enter the SMTP server name. •• [MAIL OPTION] MAIL FROM : MEMO : Enter the sender’s email address. Enter a description of the sender. •• [TEMPERATURE WARNING SET UP] MINIMUM TIME : Enter the interval for sending email.
Using WebBrowser (cont.
Using WebBrowser (cont.) Authentication set up Click [Detailed set up] → [Authentication set up] in the menu. Auth : Change the authentication method as desired. SMTP Auth : For SMTP authentication, change the authentication method to use, as desired. Pop Server name : Enter the POP server name. User name : Enter the user name for the SMTP or POP server. Password : Enter the password for the SMTP or POP server. SMTP server port : Enter the SMTP server port number.
Using PJLink protocol The projector’s network functions conform to PJLink Class 1 standards, enabling the following operations from a computer using the PJLink protocol. •• Setting the projector •• Querying the projector status To use PJLink protocol, turn [ON] the [NETWORK CONTROL] in the NETWORK menu for the projector. (See page 7) Applicable commands The following commands are used to control the projector with the PJLink protocol.
Glossary Item Descriptions Page LAN Abbreviation for Local Area Network. This is a network with a relatively narrow range such as inside a company. 4 DHCP Abbreviation for Dynamic Host Configuration Protocol. This function automatically assigns IP addresses to the connected equipment. If a device with the DHCP server function is present within a LAN, it automatically assigns IP addresses to the connected equipment.
ヱㄏㄔㄐㄏㄊチヤㄐㄓㄑㄐㄓㄕㄊㄐㄏ Web Site : http://panasonic.