Datasheet

ManualsBrandsPanasonic ManualsAutomationDigital Counter, 8 Digits, ...

LC2H

Panel mounting type

One-touch installation type

Panel mounting type

Installation frame type

PC board mounting type

Features

1. 8.7 mm .343 inch Character Height

(previously 7 mm)

Easy-to-read character height increased

from 7 mm to 8.7 mm .276 inch to .343

inch.

2. Plenty of Digits

3. Counting Speed Switchable between

2 kHz and 30 Hz

4. Panel Mounting Type Features 2 In-

stallation Methods

Comes with very easy one-touch installa-

tion type and also installation frame type

that uses the bracket on the timer/counter.

Choose a method that suits the applica-

tion.

5. Battery Replacement Easy on Envi-

ronment

To replace battery simply remove body for

the one-touch installation type, and re-

move battery lid for the installation frame

type.

6. Screw Terminals Designed for Safety

Built in finger protection.

7. Panel Covers Replacable

(Standard color is ash gray.)

Change the panel design by replacing

with a black panel cover.

8. Conforms to IP66 Protective Con-

struction (Only installation frame

type.) (Front panel surface)

9. Input Methods

1) Non-voltage input method

2) Voltage input method

3) Free voltage input method

10. Backlight Type Added to Series and

Now 2-color Switchable (green/red)

Easy viewing even in dark places and

switchable between green and red (Volt-

age input type).

11. Conforms to Safety Regulations

8.7mm

.343inch

8 digits

Product chart

Product types

1. Panel mounting type

1) One-touch installation type

1 Standard type

Note) Please ask us about types without front resetting.

Type Standard type Backlight type

Installation type

Non-voltage input type

Voltage input type

(4.5 to 30 V DC)

Free voltage input type

(24 to 240 V AC/DC)

Voltage input type

(4.5 to 30 V DC)

Panel

mounting

type

One-touch installation type 

Installation frame type 

PC board mounting type  ———

No. digits Counting speed Front reset Input method Part No.

8 digits

2 kHz/30 Hz switchable

Yes

Non-voltage input type LC2H-FE-2KK

Voltage input type (4.5 to 30 V DC) LC2H-FE-DL-2KK

30 Hz Free voltage input type (24 to 240 V AC/DC) LC2H-FE-FV-30

2 Backlight type

No. digits Counting speed Front reset Input method Part No.

8 digits 2 kHz/30 Hz switchable Yes Voltage input type (4.5 to 30 V DC) LC2H-FE-DL-2KK-B

LC2H

DIN HALF SIZE

LCD COUNTER

LC2H.fm Seite 68 Mittwoch, 29. Mai 2002 4:46 16

02/2003

Summary of content (8 pages)

PAGE 1
LC2H.fm Seite 68 Mittwoch, 29. Mai 2002 4:46 16 LC2H DIN HALF SIZE LCD COUNTER LC2H Features 1. 8.7 mm .343 inch Character Height (previously 7 mm) Easy-to-read character height increased from 7 mm to 8.7 mm .276 inch to .343 inch. Panel mounting type One-touch installation type 8.7mm .343inch 2. Plenty of Digits 8 digits 3. Counting Speed Switchable between 2 kHz and 30 Hz 4.
PAGE 2
LC2H.fm Seite 69 Samstag, 23. März 2002 4:15 16 LC2H 2) Installation frame type 1 Standard type No. digits 8 digits Counting speed Front reset 2 kHz/30 Hz switchable Yes 30 Hz Input method Non-voltage input type Voltage input type (4.5 to 30 V DC) Free voltage input type (24 to 240 V AC/DC) Part No. LC2H-F-2KK LC2H-F-DL-2KK LC2H-F-FV-30 Input method Voltage input type (4.5 to 30 V DC) Part No. LC2H-F-DL-2KK-B Note) Please ask us about types without front resetting. 2 Backlight type No.
PAGE 3
LC2H.fm Seite 70 Samstag, 23. März 2002 4:15 16 LC2H 2. PC board mounting type Type Item Input method No. digits Rated operation voltage Allowable operation voltage range Current consumption Max. counting speed Min. input signal width (ON: OFF = 1:1) Count Input method input Input impedance Reset input Residual voltage Min.
PAGE 4
LC2H.fm Seite 71 Samstag, 23. März 2002 4:15 16 LC2H Dimensions mm inch General tolerance: ±1.0 ±.039 1. Panel mounting type • External dimensions 1) One-touch installation type 2) Installation frame type 44.8 1.764 44.8 1.764 54.4 2.142 54.4 2.142 10.4 .409 (44) (1.732) 5 .197 COUNTER 22 .866 10.4 .409 48 1.890 24 .945 5 .197 48 1.890 LC2H LC2H COUNTER 22 .866 RESET 7 .276 44 1.732 24 .945 RESET 7 .
PAGE 5
LC2H.fm Seite 72 Samstag, 23. März 2002 4:15 16 LC2H 2) Backlight type Voltage input type Count input +V 0V +V Reset input +V 5 1 2 Backlight 5 3 4 1 2 5 3 6 4 1 6 0V 2 3 4 6 0V 0V +V 2. PC board mounting type • External dimensions PC board pattern (BOTTOM VIEW) 33.02±0.3 1.300±.012 5.08±0.3 .200±.012 0.6±0.1 .024±.004 General tolerance: ±1.0 ±.039 mm inch 5.08±0.3 .200±.012 Mounting area 2.54 .100 DIP switch × 8 1.9 .075 2.54 .100 3.3±0.3 .130±.
PAGE 6
LC2H.fm Seite 73 Samstag, 23. März 2002 4:15 16 LC2H 2. Backlight type Voltage input type Transistor input Contact input +V Count input Backlight connection NPN transistor PNP transistor +V +V Green +V 5 1 2 3 4 6 Red 24V DC Reset input Count input 0V 5 1 2 3 6 4 Count input Reset input 5 1 2 3 6 4 Reset input 5 1 2 6 5 3 1 4 2 0V 6 3 4 24V DC Notes) 1. Do not reverse the polarities when connecting the DC voltage for the backlight. 2. 2 and 4.
PAGE 7
LC2H.fm Seite 74 Samstag, 23. März 2002 4:15 16 LC2H 3) Since the current flow is very small from reset input terminal 3, please use relays and switches with high contact reliability. 4) When inputting a reset with an open collector of a transistor, use a transistor for small signals in which ICBO is 1 µA or less and always input with no voltage. 5) To reset externally, short reset input terminals 3 and 4 on the rear.
PAGE 8
LC2H.fm Seite 75 Samstag, 23. März 2002 4:15 16 LC2H 2 Installation frame type 1. Remove the battery cover 1 from the case. 2. Remove the battery 2 from the side of the case. The battery will come loose if you put the battery side face down and lightly shake the unit 3. Before inserting wipe clean the surface of the battery. 4. Insert the battery with the + and – sides in the proper position. 5. After replacing the battery return the battery cover to the case 5.