DVD/VCR DECK Operating Instructions Model No. PV-D4763S LSQT0676A For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.
Important Safeguards and Precautions FOR YOUR SAFETY, READ AND RETAIN ALL SAFETY AND OPERATING INSTRUCTIONS. HEED ALL WARNINGS IN THE MANUAL AND ON THE UNIT INSTALLATION 1 POWER SOURCE CAUTION Operate only from a power source indicated on the unit or in this manual. If necessary, have your Electric Utility Service Company or Video Products Dealer verify the power source in your home.
Safety Precautions/Mesures de sécurité WARNING: To prevent fire or shock hazard, do not expose this equipment to rain or moisture. CAUTION: To prevent electric shock, match wide blade of plug to wide slot, fully insert. Avertissement: Afin de prévenir tout risque d’incendie ou de chocs électriques, ne pas exposer cet appareil à la pluie ou à une humidité excessive.
Before Using Congratulations on your purchase of one of the most sophisticated and reliable products on the market today. Used properly, it will bring you years of enjoyment. Please fill in the information below. The serial number is on the tag located on the back of your DECK. • Date of Purchase • Dealer Purchased From • Dealer Address • Dealer Phone No. PV-D4763S • Model No. • Serial No.
Table of Contents DVD / VCR Important Safeguards and Precautions ............................ 2, 3 Before Using ............................................................................ 4 DECK / Disc / Cassette Information .................................. 6 , 7 Location of Controls ....................................................... 8 ~ 10 Displays (On Screen Displays and Multi Function Display) .................... 11 Connections ..................................................................
DECK / Disc / Cassette Information Prevent Accidental Tape Erasure DVD-RAM discs DVD-RAM discs must meet the following conditions for this unit to be able to play them. Break off the tab to prevent recording. Record Tab Type Screw driver Capacity To record again Cover the hole with cellophane tape. • Non-cartridge discs • Discs that can be removed from their cartridges (TYPE 2 and 4) • 12 cm (5”) 9.4 GB (double-sided) and 4.7 GB (single-sided) • 8 cm (3”) 2.
Specifications Input/Output Terminal: Input Terminal: Output Terminal: Operating Temperature: Operating Humidity: Weight: Dimensions: Discs Played (1) DVD-Video Disc DVD-Audio Disc DVD-RAM Disc (2) Compact Disc (CD-DA, Video CD) (CD-R/CD-RW, MP3, WMA, JPEG) Digital Audio Output: Pickup: 120 V AC, 60 Hz Power On: Approx. 32 watts, Power Off: Approx.
Location of Controls Remote Control 8 Bold: VCR Function Italic: DVD Function Bold Italic: VCR and DVD Functions Normal: Others For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.
Bold: VCR Function Italic: DVD Function Bold Italic: VCR and DVD Functions Normal: Others STOP/EJECT If the disc cannot be removed... First, unplug DECK. Then, prepare a rigid wire (e.g. an extended paper clip) and, applying moderate force, insert it straight into the hole at the base of the tray. The tray will eject a little. Now, pull the tray all the way out and remove the disc. p. 20 FAST FORWARD/SEARCH p. 20 PLAY Initial Setup (Connection) FrontView View DECK Front ofof DECK Over 2 inches p.
Location of Controls (continued) Bold: VCR Function Italic: DVD Function Bold Italic: VCR and DVD Functions AC Power Plug VHF/UHF Antenna Output Terminal • While plugged into an AC outlet, p. 12 Rear View of DECK this DECK consumes 4 W of electrical power in off mode. VHF/UHF Antenna Input Terminal p. 12 Component Video Output Connector (Y, PB, PR) (DVD Only) p. 13 Video Output Connector p. 12 Video Input Connector p. 35 5.
Displays (On Screen & Multi Function) Function & Channel Displays CH 0 8 When a function button is pressed, e.g. PLAY, or you change channels, a 5-second display appears. ➛ press DISPLAY. Blank Tape/ No Video Signal Indications Whenever a blank section of a tape comes up in Play mode, or when the selected channel has no broadcast signal with Weak Signal Display Feature (p. 33) set to OFF, the TV screen will turn solid blue.
Connections Basic Connections • If your TV has AUDIO and VIDEO IN terminals, connect them to DECK for higher quality picture and sound. • You can enjoy stereo sound even if your TV is not stereo by connecting a stereo amplifier to DECK. • Connect DECK and TV with an RF Coaxial Cable a (supplied) or an AV Cable b (not supplied) as shown in the figure below.
Other Connections You Can IN 1 OUT IN FROM ANT. IN Cable Box VHF/UHF OUT TO TV IN OUT VHF/ UHF R L ANT or CATV OUT Cable Box IN IN 1 IN FROM ANT. OUT VHF/UHF OUT TO TV 2-Way Splitter Cable Box OUT 1 OUT 2 IN OUT A/B Switch IN 1 IN 2 • record scrambled channels. OUT AUDIO VIDEO ■ Connect With Two Cable Boxes DVD/VCR DECK • view any (including scrambled) channel.
Connections (continued) Audio Connections Ready Checklist Turn down the volume, then turn DECK, as well as other equipment to be connected, off before proceeding with connection. Do not block ventilation holes of any of the equipment and arrange them so that air can circulate freely. Read through the instructions before connecting other equipment. Ensure that you observe the color coding when connecting audio and video cables.
■ Connecting Amplifier (5.1 ch Surround system) A. Digital connection (DECK OPTICAL Digital Audio Output Connector) When DVDs recorded in Dolby Digital or DTS are played, Dolby Digital bitstream or DTS bitstream is output from the DECK OPTICAL Digital Audio Output Connector. When DECK is connected to a Dolby Digital decoder or DTS decoder, you can enjoy theater-quality audio in your home. [An optical digital audio cable (optional) is required when an optional Dolby Digital decoder or DTS decoder is used.
Initial Setup for Basic Connections (Ready to Play) Before doing Initial Setup 1 Turn TV on. 2 See connections a RF Coaxial Cable Connection and b AV Cable Connection on page 12. Set TV to channel 3. Set TV to VIDEO. 3 [DECK ➛ TV] • Go to “Initial Setup (Ready to Play).” (See below.) [Cable Box ➛ DECK ➛ TV], [DSS ➛ DECK ➛ TV] • Turn on Cable Box and set it to your Public Broadcasting Station (PBS) channel in your time zone.
*Important: If a remote control button does not work when pressed, press the VCR button on the remote and try the button again. 3 Settings are made automatically. When setup is done, this screen appears. 6 / 8/ 2003 SUN 2 : 20PM DST : ON SETT I NG : CH 10 AUTO CLOCK SET VCR COMPLETED If “AUTO CLOCK SET IS INCOMPLETE” appears, manually set clock. See below. AUTO CLOCK SET IS I NCOMPLETE PLEASE SET CLOCK BY PRESSING ACT I ON KEY Manual Clock Set If Auto Clock Set was incomplete.
Reset Language, Channels, Clock, 1 MENU SET UP VCR SET CLOCK SET UP CHANNEL SD CARD PLAYBACK IDIOMA/LANGUE : ENGLISH VCR’S OUTPUT CH:3 Press ACTION* to display MENU. SELECT : SET:SET EXIT : ACTION 2 Language Channels Clock MENU SET UP VCR SET CLOCK SET UP CHANNEL SD CARD PLAYBACK IDIOMA/LANGUE : ENGLISH VCR’S OUTPUT CH:3 MENU SET UP VCR SET CLOCK SET UP CHANNEL SD CARD PLAYBACK IDIOMA/LANGUE : ENGLISH VCR’S OUTPUT CH:3 1) Press to select language item.
*Important: If a remote control button does not work when pressed, press the VCR button on the remote and try the button again. Time Zone Adjust (Only when Auto Clock is set.) 1) Press to select “SET CLOCK,” and press SET. VCR’s Output Channel 1) Press to select “VCR’S OUTPUT CH.,” and press SET. MENU SET UP VCR SET CLOCK SET UP CHANNEL SD CARD PLAYBACK IDIOMA/LANGUE : ENGLISH VCR’S OUTPUT CH:3 SELECT : SET : SET EXIT : ACTION 2) Press to select “TIME ZONE ADJUST,” 2) Press SET.
For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.
For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.
*Important: If a remote control button does not work when pressed, press the DVD button on the remote and try the button again. ■ Forward/Reverse Scene Search Press FF/SLOW+ or REW/SLOWduring play. Press PLAY to release. • Starting forward/reverse search during play started from menu on Video CDs may recall menu. • Search speed, slow at first, increases with each additional press of the button up to 5 levels. V.S.S. (Virtual Surround Sound) Press VSS in DVD mode.
Timer Recording Ready Checklist All connections are made. (pp. 12 ~ 15) TV and DECK are plugged in. Clock set correctly. (p. 18) Tape has rec.tab. (p. 6) Remote is in VCR mode. (Press VCR.) Sufficient tape remaining for recording time. 1 Press PROG* to display Program.
*Important: If a remote control button does not work when pressed, press the VCR button on the remote and try the button again. Review, Replace or Clear Program Contents: (Recording is not in progress) 1 2 To cancel a Timer Recording in progress... DT START STOP 7 9 : 00A 12 : 00A 8 10 : 00P 12 : 00P 10 8 : 00P 9 : 00P SU 9 : 00P 10 : 00P CANCEL SELECT ENTER EXIT 3 CH SPD 08 SP 02 SP 10 SP L1 LP : ADD / DLT 1-8 : : SET : PROG Press to select number and press SET to display.
MTS Broadcast/ VHS Hi-Fi Stereo System Connection Make the Audio/Video Connection as shown on pp. 12 ~ 15. • You can use TV connected to a Stereo amplifier and speakers instead of Stereo TV. Receivable Broadcast Types The following are possible audio broadcast types and onscreen displays. The signal being received is indicated with an “ ” mark while the selected audio mode is indicated with an arrow. DISPLAY To display the broadcast signal being received, ➛ press DISPLAY*.
*Important: If a remote control button does not work when pressed, press the VCR button on the remote and try the button again. Audio Mode for Recording 1 Press AUDIO (SAP/Hi-Fi) to display audio mode. (Display disappears after 5 seconds.) 2 STEREO SAP MONO Press AUDIO (SAP/Hi-Fi) repeatedly to select desired mode. • Refer to “Receivable Broadcast Types” on page 26. • Arrow indicates selection. 3 Make a recording. See page 21. VCR Operation Audio Mode for Playback 1 2 3 Start playback.
Multi-Brand Control Feature POWER DSS/ CABLE ENTER 28 For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.
TV Brand Code Numbers Panasonic ....................... 01, Quasar ............................ 01, RCA ....................................... GE ......................................... Zenith .................................... Magnavox .............................. 02 02 03 03 04 05 Sylvania ................................ Sharp ............................... 06, Sony ...................................... Toshiba ................................. Sanyo ....................................
Tape Operation Search System For each recording, an invisible index mark is placed on the tape. A program index and information are also included for timer recordings. These marks are used to access or scan recordings. Index Search Program End Search Locates end point of recording for continuity. 1 1 2 Program Fig. 1 2 Fig. 2 Fig. 3 Note Note • If Index Search is started very close to an index mark, that index mark may not be counted in the search.
*Important: If a remote control button does not work when pressed, press the VCR button on the remote and try the button again. Auto Operation Functions Auto Play Insert a tape ➛ Power comes on, ➛ Play starts if there is no record tab (see p. 6). Auto Rewind Play Fast Forward ➛ Tape end ➛ Rewind Play Auto Eject (Repeat Play must be off) Play ➛ Tape end ➛ Rewind ➛ Tape ejects if set some programs Commercial Skip VCR fast forwards (skips) over 1~3 minutes of recorded tape. 1 Press CM/ZERO in Play mode.
Tape Operation (continued) Repeat Play VCR/TV Selector Feature Set to playback a recording over and over. 1 2 Press ACTION* to display MENU. MENU SET UP VCR SET CLOCK SET UP CHANNEL SD CARD PLAYBACK IDIOMA/LANGUE : ENGLISH VCR’S OUTPUT CH:3 Press to select “SET UP VCR,” and press SET. SELECT : SET : SET EXIT : ACTION 3 SET UP VCR REPEAT PLAY REMOTE WARN I NG AUTO SHUT-OFF AUTO VCR/TV SELECT : END : ACT I ON : : : : OFF ON OFF OFF Press to select “REPEAT PLAY,” and press SET to set “ON” or “OFF.
Special VCR Features (continued) Remote Warning Feature If Multi-brand feature is used (p. 28), and this feature is set to on, a warning appears whenever an invalid key is pressed in TV, DSS or CABLE mode. 1 2 Press ACTION* to display MENU. MENU SET UP VCR SET CLOCK SET UP CHANNEL SD CARD PLAYBACK IDIOMA/LANGUE : ENGLISH VCR’S OUTPUT CH:3 SELECT : SET : SET EXIT : ACTION 3 *Important: If a remote control button does not work when pressed, press the VCR button on the remote and try the button again.
Copying Your Tapes (Dubbing) Connection VCR/ Camcorder (Hi-Fi) OUT OUT VIDEO AUDIO TV DVD/VCR DECK IN 1 VIDEO IN 2 VIDEO L R Front of DECK IN FROM ANT. L AUDIO1 R VHF/ UHF VHF/UHF OUT TO TV L-AUDIO IN2-R (Audio/Video In Terminals on the front of DECK are available) 1 Connect VIDEO OUT terminal on Playing VCR to VIDEO IN terminal on DECK. To monitor the dubbing, also connect TV as shown. 2 Connect “L” and “R” AUDIO OUT terminals on Playing VCR to “L” and “R” AUDIO IN terminals on DECK.
Disc Operation Subtitle Language (DVD only) You can select a different subtitle language (if offered) than the one set at the Settings for DVD Operation. (See p. 53.) 1 Press SUB TITLE* in Play mode to display the subtitle selection on-screen. • Display disappears after 5 seconds. • When no subtitles are offered, “-” will be displayed instead of the language number. 2 Te amo Press to select a language. Press to select “ON” or “OFF.” Subtitle language being played back (see chart, right).
*Important: if a remote control button does not work when pressed, press the DVD button on the remote and try the button again. When appears on the screen while a button is being operated, it means that the corresponding operation is prohibited by DECK or the disc. Multiple Angle Viewing (DVD only) DVDs may contain scenes shot from multiple camera angles allowing the same scene to be viewed at different angles. You can view these angles, if available, using the ANGLE button.
Disc Operation (continued) Title Menu (DVD only) Some DVDs have more than one title, e.g. movies. If the disc offers a title menu, you can select the desired title number. (Operation may vary according to the disc.) 1 T I TLE MENU Dogs Cas t l es Love r s B i r ds Press TITLE* in Play mode to display the title screen. 2 T I TLE MENU Dogs Cas t l es Love r s B i r ds B i rds of the world Press or NUMBER keys to select a title, and press SET or PLAY to start playing.
*Important: if a remote control button does not work when pressed, press the DVD button on the remote and try the button again. Program Play (Video CD/CD only) Ready Checklist DECK is in DVD mode, press DVD. Video CD or CD is inserted. You can program specific tracks and order of play. 1 2 Press ACTION to display DVD MAIN MENU.
Disc Operation (continued) Random Play (Video CD/CD only) Tracks are played in a random order. 1 2 Ready Checklist DECK is in DVD mode, press DVD. Press ACTION* to display DVD MAIN MENU. DVD MAIN MENU DISC LANGUAGES AUDIO OUTPUT ST I L L MODE : AUTO TV MODE : 4:3 Letterbox PARENTAL LOCK :LEVEL 8 PLAY MODE SELECT SET END : : SET : ACTION Press to select “PLAY MODE,” and press SET to display.
*Important: if a remote control button does not work when pressed, press the DVD button on the remote and try the button again. DVD-Audio Operation This DECK, equipped with a 192 kHz/ 24 bit Audio D/A converter, supports DVD-Audio recorded with high quality sound. The DVD-Audio feature includes “Still Image Skip” and “Bonus Group Playback” functions. (See below.) Please refer to “Basic DVD Operation” on pages 22 and 23. Still Image Skip DVD-Audio still images (only if contained) can be skipped over.
DVD-RAM Operation (DVD-RAM only) You can enjoy playing your personally recorded/edited DVD-RAM discs on this DECK. Note • This DECK was designed for playback only. DVD-RAM recording is not possible. Play a DVD-RAM 1 Do steps 1 ~ 3 on page 22. 2 Press TITLE* or MENU to display Direct Navigator or Play List menu for easy title or scene selection. • Play begins from the first program title recorded on the DVD-RAM. • See below for Direct Navigator or next page for Play List information.
1 2 Press MENU in Play/Stop mode to display the Play List menu. Press Play List No.
DVD Operation using On-Screen Displays When DISPLAY is pressed, On-Screen Displays show disc information (title/chapter/track number, elapsed playing time) and DECK information (repeat play, play mode). 1 Ready Checklist DECK is in DVD mode, press DVD. Press DISPLAY* in Play or Stop mode to display “On-Screen Displays.” • Each press of DISPLAY changes the on-screen display as follows. (Refer to pp. 44 ~ 48.
*Important: if a remote control button does not work when pressed, press the DVD button on the remote and try the button again. Detailed Descriptions of each On-Screen Display ■ Disc information screen (for DVD-Video) 1. TITLE No. 1 2 • Select “TITLE”, and press SET. or NUMBER keys, and press SET. • Change the No. by pressing T I TLE : 1 CHAPTER : 12 DVD 01 : 12 : 55 3 4 2. CHAPTER No. • Select “CHAPTER”, and press SET. • Change the No. by pressing or NUMBER keys, and press SET.
DVD Operation using On-Screen Displays (continued) ■ Disc information screen (for Video CD/ CD) 1. TRACK No. 1 2 TRACK PBC : 1 : OFF VIDEO CD 01 : 35 : 12 3 4 • Select “TRACK”, and press SET*. • Change the No. by pressing or NUMBER keys, and press SET. 2. Playback control ON/OFF [Video CD with playback control only] ON Video CD menu play is displayed. OFF Video CD menu play is not displayed. SET : SET NEXT : DISPLAY 3. Disc currently being played Video CD CD 4.
*Important: if a remote control button does not work when pressed, press the DVD button on the remote and try the button again. ■ DECK information screen (for DECK) 1. Repeat Play • Select “REPEAT”, and press SET. • Change the desired mode during play by pressing DVD-Video CHAPTER DVD-Audio TRACK DVD-RAM (PROGRAM) PROGRAM (PLAY LIST) PLAY LIST Video CD/CD TRACK , and press SET. TITLE GROUP DISC ALL PLAY LIST DISC OFF OFF OFF OFF OFF 1 PLAY REPEAT : OFF SELECT : SET : SET END : DISPLAY 2.
DVD Operation using On-Screen Displays (continued) For your reference • CHAPTER/TITLE REPEAT PLAY (DVD-Video) OPEN/ CLOSE CURRENT PLAYBACK POSITION TITLE chapter chapter chapter CHAPTER REPEAT TITLE REPEAT NORMAL PLAY POWER PLAY FF/REW PAUSE STOP • TRACK/GROUP REPEAT PLAY (DVD-Audio) CURRENT PLAYBACK POSITION GROUP track GROUP track track track track track NUMBER keys SKIP TRACK REPEAT GROUP REPEAT NORMAL PLAY SKIP SELECT • TRACK/DISC REPEAT PLAY (Video CD/CD) CURRENT PLAYBACK POSITION t
MP3/WMA/JPEG Playback Operation This unit can play MP3/WMA/JPEG format CD-R or CD-RW recorded for personal use on a PC, etc. Some discs may not play due to the condition of the recording. 1 2 Press POWER* on the remote or DECK. Press OPEN/CLOSE, then place an MP3/WMA/JPEG disc into the disc tray. Press OPEN/CLOSE to close. 3 • MP3/WMA/JPEG menu is displayed. • Playback starts automatically (except JPEG files). • CD directory is displayed.
MP3/WMA/JPEG Playback Operation (continued) JPEG Playback You can play back JPEG images. Displayable Image Size: 32x32~7680x7680 pixels Note • Some JPEG format may not be played back. Do steps 1~3 on page 49. 1 2 Press to select an JPEG file ( ). Press SET or PLAY. Selected JPEG file is displayed. [JPEG Playback Screen] ■ Returned on the MP3/WMA/JPEG MENU ➡ Press STOP. (See p. 49) ■ Next/Previous Search ➡ Press SKIP | or | SKIP. ■ Start Slide-show ➡ Press FF/SLOW+ or REW/SLOW-.
JPEG Zoom (During JPEG Playback.) You can enlarge specific portions of a JPEG picture and select the zoom ratio using the ZOOM button on the remote during JPEG Playback screen. Set Zoom size. Press ZOOM repeatedly to change display as follows. ➡ Press STOP to return to the MP3/WMA/JPEG MENU. PLAY REW/ SLOW- FF/ SLOW+ • You can enlarge the center portion of the image to one of 2 magnifications. • Operation can be done during Rotation (below). X 1.0 (ORIGINAL) STOP STILL X 1.5 (ZOOM 1) 1st press X 2.
DVD Lock Feature *Important: If a remote control button does not work when pressed, press the DVD button on the remote and try the button again. You can prevent playback of DVDs of a specific rating level which may be unsuitable for children. • Some DVDs are encoded with a rating level. If the disc rating is higher (stricter) than the one you preset, playback will be prohibited. Ready Checklist DECK is in DVD mode, press DVD.
Settings for DVD Operation 1 2 Press ACTION to display DVD MAIN MENU. DVD MAIN MENU DISC LANGUAGES AUDIO OUTPUT ST I L L MODE : AUTO TV MODE : 4:3 Letterbox PARENTAL LOCK :LEVEL 8 Press to select an item, and press SET. Once initial settings are done, they remain in memory (even after power off) until changed. This means DECK will operate under the same conditions (especially DVDs) each time. Ready Checklist DECK is in DVD mode, press DVD.
Settings for DVD Operation (continued) Audio Output Ready Checklist Select the digital output to be output from the optical digital audio output connector of DECK. 1 2 Press ACTION* to display DVD MAIN MENU.
*Important: If a remote control button does not work when pressed, press the DVD button on the remote and try the button again. Speaker Output Setup Set the number of speakers connected to the receiver (amplifier, decoder.) (See pp. 14, 15.) 1 Do steps 1~3 on page 54.
*Important: If a remote control button does not work when pressed, press the DVD button on the remote and try the button again. Test Signal Setup Still Mode This feature assists in the setting of OUTPUT BALANCE. Starting with (L) front speaker, a test sound is output in clockwise order. While the test signal is output, adjust the output of the center speaker and Surround speaker (R/L). (See “OUTPUT BALANCE.” P. 56.) steps 1~2 of “Output 1 Do Balance Setup” on page 56.
SD Card JPEG Playback Still image data (JPEG) made with a digital camera, digital video camera, or PC can be played back using an SD Memory Card/MultiMediaCard. Compatible Card : An SD Memory Card and MultiMediaCard can be used in this DECK. Displayable Image Formats : DCF format 1.1 compliant Baseline JPEG format Y Cb Cr (compressed format) (Sampling ratios 4:4:4, 4:2:0, 4:2:2, 4:1:1) (80 x 60 ~ 5120 x 3840 pixels) Exif2.
Notes SINGLE PLAY mode Do steps 1 - 2 on p. 58. 1 SINGLE 1/3 SELECT : END : ACTION SET : SET PAGE : SKIP+/- • Once selected, image is displayed in about 3 sec. (“ ” appears while Press to select data is read. DO NOT remove SD “SINGLE,” and press SET. Card during data reading.) to move Press • Deck buttons are inoperative. Use remote control. cursor to desired file in • If cursor is at top of the INDEX INDEX AREA. AREA, pressing “ ” selects previous (Press SKIP +/- to display page.
Language Code List Enter the appropriate code number for the initial settings “AUDIO”, “SUBTITLE” and/or “MENUS” (see p. 53).
Warning and Instruction Displays These displays will alert you to a missed operation or provide further instructions. OSD PLEASE SET CLOCK BY PRESSING ACTION KEY PLEASE PREPARE FOR TIMER REC CHECK CASSETTE RECORD TAB NO CASSETTE TO CANCEL TIMER REC HOLD DOWN STOP KEY FOR APPROX 3 SEC VIDEO HEADS MAY NEED CLEANING PLEASE INSERT HEAD CLEANING CASSETTE OR REFER TO MANUAL END Caution Page If you attempt to set or review a Timer Recording and the Clock is not set...
Before Requesting Service Check the following points if you are having trouble with your DECK. Power Correction No power… • Completely insert Power Plug into an AC outlet. • Set POWER button to on. • Make sure power source is active. Power turns itself off... • Auto power-off (shutoff) occurs after about 5 min. in DVD mode with no operation, or if there is no broadcast signal in TV or Playback mode. Turn the power back on. (pp. 23, 33) Correction Recording & Playback TV program cannot be recorded...
Check the following points if you are having trouble with your DECK. DVD/ Video CD/ CD Correction Play fails to start even when PLAY is pressed... • This DECK cannot play discs other than DVDs, Video CDs and CDs. • The disc may be dirty and require cleaning. Play starts but then stops immediately... • Be sure disc is installed with label side up. Picture is distorted during rapid advance or rapid reverse... • The picture will be somewhat distorted at times: this is normal.
Limited Warranty PANASONIC CONSUMER ELECTRONICS COMPANY, DIVISION OF MATSUSHITA ELECTRIC CORPORATION OF AMERICA One Panasonic Way Secaucus, New Jersey 07094 PANASONIC SALES COMPANY, DIVISION OF MATSUSHITA ELECTRIC OF PUERTO RICO, INC., AVE. 65 de Infantería, Km. 9.
Limited Warranty Limits And Exclusions This Limited Warranty ONLY COVERS failures due to defects in materials or workmanship, and DOES NOT COVER normal wear and tear or cosmetic damage.
Spanish Quick Use Guide/ Guía para rápida consulta CONEXIONES/CONFIGURACION Para ajustar el idioma, canal yINICIAL (READY TO PLAY) Realice la conexión de la antena o TV por cable antes de enchufar el cable de CA. EL DVD/VCR iniciará automáticamente la fijación de los canales y del reloj al enchufar el cable de CA. CONEXIONES DVD/VCR Para Ant/Cable ➛ DVD/VCR ➛ TV 1 2 Terminal IN FROM ANT. Televisor 1 Conecte el cable de la antena al terminal IN FROM ANT del DVD/VCR.
Programación fácil para la grabación con temporizador Operaciones básicas para la reproducción 1 Inserte un cassette, • La alimentación del DECK se activa. En la Pantalla de Visualización Multi Función se ilumina “VCR”. PROG 1 Presione para visualizar la pantalla de Programacion. 2 Presione PLAY para reproducir el cassette. 2 • Si el cassette no tiene la lengüeta de prevención de grabación (página 6), se inicia la reproducción automáticamente. 3 Presione STOP para detener el cassette.
Spanish Quick Use Guide/ Guía para rápida consulta Operaciones básicas del DVD Presione POWER en el control remoto o el aparato. 1 2 Presione DVD para seleccionar el modo DVD. OPEN/CLOSE. 3 1)2) Presione Ponga un disco en la bandeja de disco. • Sujete el disco sin tocar ninguna de sus superficies, póngalo con el lado donde esté impreso el título hacia arriba, alinéelo con las guías y póngalo en su posición apropiada. Disco de 3” (8 cm) / Disco de 5” (12 cm) 4 Presione PLAY para iniciar la reproducción.
Fijaciones iniciales 1 Presione DVD para seleccionar el modo DVD. ACTION en el modo de parada para 2 Presione visualizar MENU. para seleccionar el artículo deseado. 3 Presione Presione SET. IDIOMAS DEL DISCO Todos los idiomas ofrecidos en el disco pueden ser ajustados. Si el idioma ajustado no es ofrecido en el disco, se seleccionará el idioma original del disco. SALIDA DE AUDIO Puede usted ajustar la salida audio procedente del terminal de salida audio digital.
Utilización de un menú de títulos [DVD solamente] Algunos discos con películas, vienen con dos o más títulos. Por ejemplo, si el disco tiene un menú de títulos grabados, el botón TITLE podrá utilizarse para seleccionar el título de la película. Presione TITLE durante la reproducción. Ahora se visualiza una lista de los títulos del disco. Presione o las T I TLE MENU teclas de números para Dogs Cas t l es seleccionar el título Love r s B i r ds deseado. Dogs Presione SET para elegir.
Ejecución de JPEG con Tarjeta SD Los datos de imagen fija (JPEG) creados mediante la cámara digital, la cámara de video digital o el PC se pueden ejecutar utilizando una tarjeta SD/MMC. Inserte la tarjeta SD 1 o MENU PREPARAR VCR FIJAR RELOJ FIJAR CANAL SD CARD REPRODUCCION LANGUE/LANGUAGE:ESPAÑOL CANAL DE SALIDA : 3 Configuración de los altavoces 1 2 3 ELEGIR : FIJAR : SET SALIR : ACTION Cambia la pantalla MENU SD automaticamente.
DECK & VCR A ACTION button ...................................................................... 8, 18 Accessories ............................................................................... 4 ADD/DELETE button (Add or Delete a Channel) .................. 8, 19 Audio Broadcast types (Stereo/SAP/Mono) .............................. 26 Audio Mode (Playback, Recording) .......................................... 27 Auto Operation Functions ..........................................................