Digital Camera User Manual

Recording
- 104 -
Note
•
Aperture or shutter speed can be set by touching [F] (aperture) or [SS] (shutter speed) and then
dragging the exposure meter bar in the Quick Menu (P59).
• The brightness of the LCD monitor/Viewfinder and the recorded pictures may differ. Check the
pictures on the playback screen.
• Rotate the rear dial to display the [EXPO.METER]. Unsuitable areas of the range are displayed
in red.
• If the exposure is not adequate, the aperture value and the shutter speed turn red and blink
when the shutter button is pressed halfway.
• Display of the shutter speed will count down when the shutter speed is set slow and the shutter
button is pressed all the way.
• We recommend using a tripod when the shutter speed is slow.
• When the flash is activated, the fastest shutter speed that can be selected is 1/160th of a
second. (P75)
• The [SENSITIVITY] is automatically set to [AUTO] when you switch the Recording Mode to
Shutter-Priority AE Mode while the [SENSITIVITY] is set to [ ] (Intelligent).
• The [SENSITIVITY] is automatically set to [ISO160] when you switch the Recording Mode to
Manual exposure while the [SENSITIVITY] is set to [AUTO] or [ ] (Intelligent).
• When you use a lens with an aperture ring, the setting for the rear dial becomes effective if you
rotate the aperture ring to the [A] position and the aperture ring setting takes priority if you
rotate the aperture ring to a position other than [A] in Aperture-Priority AE Mode.
• The setting of the aperture ring takes priority when you use a lens with an aperture ring during
the manual exposure.