Digital Camera User Manual

Others
- 184 -
If you use the remote shutter (DMW-RSL1; optional), you can avoid jitter (camera shake)
when using a tripod and you can keep the shutter pressed fully when taking pictures with
[B] (Bulb) or Burst Mode. The remote shutter works similar to the shutter button on the
camera.
Note
•
Always use a genuine Panasonic remote shutter (DMW-RSL1; optional).
• You cannot operate the camera with the remote shutter in the following cases.
– When the Sleep Mode is canceled
– When starting/ending the recording of motion pictures
• Read the operating instructions of the remote shutter for details.
By connecting the AC adaptor (optional), and then plugging them into an electrical socket,
you can connect this unit to a PC or printer and use without worrying about the capacity of
the battery. To use the AC adaptor, a DC coupler (optional) is required.
Note
•
Always use a genuine Panasonic AC adaptor (optional).
• When using an AC adaptor, use the AC cable supplied with the AC adaptor.
• Also read the operating instructions for the AC adaptor and DC coupler.
Remote Shutter (optional)
AC adaptor (optional)/DC coupler (optional)