Digital Camera User Manual

Basic
- 34 -
3 Press the shutter button halfway.
¢1 When AF Mode is set to [ ], the first AF area at which focus is achieved may be
displayed momentarily while pressing halfway.
¢2 A beep will be emitted when focus is first achieved during the pressing halfway.
• When brightness is insufficient in [AFC], perform the same operation as in [AFS]. Here,
the [AFC] on the screen will go yellow and change to [AFS].
Note
•
The focus range is different depending on the lens used.
– When the interchangeable lens (H-FS014042) is used: 0.3 m (0.99 feet) to ¶
–
When the interchangeable lens (H-FS045200) is used: 1.0 m (3.28 feet) to ¶
∫ Subjects and recording conditions which are difficult to focus
•
Fast-moving subjects, extremely bright subjects or subjects without contrast
• When recording subjects through windows or near shiny objects
• When it is dark or when jitter occurs
• When the camera is too close to the subject or when taking a picture of both distant and near
subjects
Focus Mode AFS
Focus
When the subject is
focused
When the subject is not
focused
Focus indication A On Blinks
AF area B Green —
Sound Beeps 2 times —
Focus Mode AFC
Focus
When the subject is
focused
When the subject is not
focused
Focus indication A On Blinks or Off
AF area B
Green
¢1
—
Sound
Beeps 2 times
¢2
—
B
A