Digital Camera User Manual

- 63 -
Basic
• The number of days that have passed since the departure date can be printed out using the
“PHOTOfunSTUDIO” bundled software on the CD-ROM (supplied).
• The travel date is calculated using the date in the clock setting and the departure date you set.
If you set [WORLD TIME] to the travel destination, the travel date is calculated using the date in
the clock setting and the travel destination setting.
• The travel date setting is memorized even if the camera is turned off.
• If you set a departure date and then take a picture on a date before this departure date, [-]
(minus) is displayed in orange and the day of the vacation that you took the picture is not
recorded.
• If the travel date is displayed as [-] (minus) in white, there is a time difference that involves date
change between the [HOME] and [DESTINATION]. (It will be recorded)
• The [TRAVEL DATE] feature is disabled when recording [AVCHD] motion pictures.
• While recording motion pictures, the [LOCATION] feature is disabled.
• When Intelligent Auto Mode is selected, the [TRAVEL DATE] feature is disabled. Setting of
other Recording Mode will be reflected.
• The [E-SHUTTER VOL] only works when set to [SH] for Burst Mode.
— [TRAVEL DATE]
Departure date and return date of the travel as well as the name
of the travel destination can be set.
You can display the number of days that have passed when
playing back the pictures and stamp it on the recorded pictures
with [TEXT STAMP] (P152).
[TRAVEL SETUP]:
[OFF]: Elapsed days are not recorded.
[SET]: Departure date and return date are set. Elapsed days
(how many days after) of the travel are recorded.
•
The travel date is automatically canceled if the current date is after
the return date.If the [TRAVEL SETUP] is set to [OFF], [LOCATION]
will be also set to [OFF].
[LOCATION]:
[OFF]
[SET]: Travel destination is recorded at the time of recording.
•
For details on how to enter characters, refer to “Entering Text” on
P122.
[BEEP]
Set the volume for electronic noises and the electronic shutter
noise.
[BEEP VOLUME]:
[s] (Muted)
[t] (Low)
[u] (High)
[E-SHUTTER VOL]:
[ ] (Muted)
[] (Low)
[ ] (High)