Instruction Manual (UK)
4
A) Suction inlet
B) Connection pipe
C) Hose
D) Curved pipe
E) Manual suction control
F) Telescopic tube
G) Floor nozzle (depending on model)
H) Dusting brush
I) Crevice nozzle
J) ON/OFF Switch button / Variable power control
K) Cord rewind button
L) Handle
M) Dust compartment handle
N) Dust compartment cover
O) Main filter B
P) Main filter A
Q) Pre-filter
R) Maximum dust level mark
S) Dust compartment
T) Rear cover
U) Exhaust cover
V) Parquet floor nozzle (MC-E8024, MC-E8024K only)
B-1 Insert the connection pipe into the suction inlet and turn
the pipe to the right.
B-2 Telescopic tube
Keep hold of the tube grip and pull out the tube to the
required length.
B-3 Fit together curved tube and telescopic tube by twisting
slightly.
B-4 Fit together the end of the tube and the nozzle pipe by
twisting slightly.
C-1 Floor nozzle MC-E8024, MC-E8024K, MC-
E8023, MC-E8023K, MC-E8021, MC-E8021K
The floor nozzle is equipped with a pedal, which allows
you to alter its position according to the type of floor to
be cleaned.
C-2 Parquet floor nozzle (MC-E8024, MC-E8024K
only)
For the gentle cleaning of parquet and hard floors.
C-3 Cord rewind button (K)
Pull out the total length of the mains lead and plug into
the socket. To rewind the cord, press the button.
NOTE: Please hold the plug to prevent it striking you or
the product.
ON/OFF Switch button / Variable power control (J)
To start or stop the cleaner, press the button.
To increase or reduce the power, turn the same button.
C-4 Manual suction control
The curved pipe of the hose is attached with a manual
suction control, which allows you to briefly reduce the
suction level.
C-5 Dusting brush
For vacuuming pictures frames, furniture, books and
other objects.
C-6 Crevice nozzle
For vacuuming in inaccessible places like a window
frame or a crevice in the wall.
C-7 Park system
For short breaks during vacuuming, slide the hook
attached to the floor nozzle pipe into the slot on the rear
side of the cleaner.
C-8 How to store / carrying the cleaner
Switch off the cleaner, remove the plug from the socket
and rewind the cord.
To store or carrying the cleaner in a vertical position,
slide the hook of the floor nozzle pipe into the clip on the
underside of the cleaner.
A - IDENTIFICATION OF MAIN PARTS
B - HOW TO ASSEMBLE YOUR CLEANER
C - HOW TO OPERATE YOUR CLEANER
ZXL008-MC-E802405.2.37:00PMページ6