Operating Instructions

FOOD PROCESSOR -SALAD DRAINER-

Ingredient Preparations for Salad Drainer

How to Use: Salad Drainer

After inserting the Salad Drainer into the Bowl, insert the

ingredients into the Salad Drainer. Place the Drainer

Cover on top of the Salad Drainer until the mark aligns

as shown in A. Turn the Drainer Cover anticlockwise

until the mark aligns as shown in B.

Place the Bowl Lid on top of the Bowl and turn it

clockwise until a 'click' sound is heard. Attach the Bowl

assembly onto the Motor Housing as seen in page 9.

Plug-in the plug into the socket and turn the Rotary

Switch to select the speed required.

After the processing is completed, return the Rotary

Switch to OFF position "0" and unplug from the socket.

Remove the Salad Drainer from the Bowl.

Note:

• Maximum working capacity of the Salad Drainer: 200 g or tilll maximum height of Salad Drainer, whichever

comes first.

• Prohibited ingredients: refer to page 5.

• Ensure that the ingredients are spread evenly around the Salad Drainer before processing.

• Always ensure that the Drainer Cover is attached onto the Salad Drainer before operation, otherwise the

ingredients might come out and tear around the Bowl.

• Depending on the speed and amount of ingredients used, there will be significant vibrations present. In that

case, hold down on the Bowl Lid to support it during its operation.

1 2

3 4

Cut into 3 ~ 5 cm slices.

Shredded to 1 ~ 3 mm.

100 g

1Drainer

20 ~ 40 sec

20 ~ 50 sec

Function Speed Preparation Method

Max Single

Use

Operating Time (approx.)

200 g

Lettuce

Leaves

Ingredient

Cabbage

Note:

Ensure that the Drive Shaft is protruding from the

Salad Drainer after insertion.