Operating instructions

Read Before Using - 13
Using the Buttons and Dials
Start/Pause
9 10
Process indicator9.
This indicator shows the current process -
of the programme. The process consists
of wash
, rinse , and spin .
The light goes off when the wash is -
finished.
Remaining time indicator10.
This indicator shows the approximate -
time until the washing finishes. For
example, ‘200’ means 200 minutes.
Display on NA-107VC4
Unlocking the door
The door automatically locks while in use,
and the
symbol is shown while the door
is locked. A click will be heard when the
door locks or unlocks.
Note
While the door is locked, if the -
appliance is switched off, or if there
is a power interruption, the door will
unlock after 1 or 2 minutes.
Press the Start/Pause button to unlock
the door during operation.
In the following cases, the door can’t be
unlocked even if operations are paused.
During spin-drying -
When the water level is beyond a certain -
level
Note
If you want to unlock the door, set -
the programme selection dial to Off,
and then select a programme (ex.
Cotton).
Caution
If you have to unlock the door
mid-programme, make sure that
water from the drum does not
overflow onto the floor.
Water and soap suds might come out
of the door and the door opening. You
may need a towel to soak them up.
NA-107VC4_AU.indb 13 2012-5-18 11:01:25