Operating Instructions

Installation Instructions - 31
Choosing the Right Location
Installing a built-in washing
machine
You need a space at least 60 cm wide. -
At least 2 mm of clearance on the sides,
and 3 mm of clearance above and
behind the appliance are required.
The counter above the appliance -
must be firmly fixed to the adjoining
cupboards.
If the clearance height ranges from 821 -
to 845 mm, request the sales dealer or
service agent to install a metal cover on
top of the appliance (sold separately),
instead of the standard cover panel.
Note
If you need any accessories, contact
your local Customer Communications
Centre.
Metal cover (AXW4595-7SR0)
Changing the cover panel
Remove the three screws on the back 1.
of the appliance.
Slide the cover panel towards the 2.
rear and remove it.
Put the metal cover on the top of the 3.
appliance.
Secure the metal cover with all of the 4.
screws (14 in total).
Front
Metal cover
NA-168VG3_English.indb 31 2011-3-17 15:10:06