Operating instructions

14
Washing
Washing
Basic Method
NOTE
● Do not get laundry caught in the
door.
It can cause damage to the door
seal.
● Do not put too much laundry into
the drum.
It can cause excessive vibration or
damage to the appliance.
■To open the door during operation
(The door is locked during operation)
● During spinning process, it may take
about 1 minute for the drum to stop
rotating.
Using optional functionsChanging settings
3
2 1
Press “Pause”.
(The lock is released with
a click)
15
Washing
■Preparing
● Sort the laundry and put it into the
drum. (P.9)
● Add the detergent. (P.12)
NOTE
● Colours can run between clothes,
so remove coloured laundry soon
after the programme finishes.
NOTE
● The range of settings you can
change and the optional functions
you can add vary depending on the
programme.
(P.20, 21)
1
Turn on the power.
2
Select a programme.
(P.18, 19)
The required time is displayed.
■Changing settings
■Using optional functions
3
Start operation.
● Weighing (about 30 seconds)
● Required time display
(recalculated)
Operation finishes.
(The buzzer sounds and the door
lock is released.)
Some programmes do not
weigh the laundry. (P.18, 19)
(Display of
weighing)
(e.g.)
Changing settings
Temperature (P.24)
Spin speed (P.25)
Timer (P.25)
After selecting a programme, you
can change the following settings.
After selecting a programme, you
can add the following optional
functions.
Prewash (P.27)
Extra Rinse (P.27)
Easy Iron (P.27)
Speed/Eco (P.27)
Mode (P.26)
(Select and run the wash,
rinse or spin process)
Using optional functions