Operating instructions

Troubleshooting - 37
Fault Checklist
Problem Cause
Time
The displayed
remaining time
changes.
The remaining time is estimated and corrected continually. -
Thus, the time displayed may change.
Noise
There is an unusual
noise or vibration.
There may be metal items in the drum. -
The anchor bolts may not have been removed. -
(P.40)
The appliance may be on a sloping or unstable surface. -
If none of the above is the cause, contact your local
Customer Communications Centre.
There is noise when
the water drains out.
This is normal; it is noise generated by the operation of -
the drain pump.
Noise increases
during high spin
speed.
This is normal; Motor noise increases gradually with the -
spin speed.
There are noises
during washing or
rinsing.
This is normal; They are noises from the pump that -
circulates washing or rinsing water.
(148VB6, 128VB6, 147VB6 and 127VB6)
Others
The electricity supply
cuts out while the
appliance is on.
The appliance stops operating. When power is restored, it -
resumes operation from the point that it had stopped.
A circuit breaker trips
and the electricity
supply is cut.
The appliance stops operating. When the breaker is reset, -
it resumes operation from the point that it had stopped.
However, we recommend that the reason that caused the
breaker to trip is found and steps taken to solve it.
The water supply is
disrupted.
When the water is supplied again, it may be impure at first. -
You have to disconnect the water supply hose and drain
away the impure water through the tap. Make sure that the
water supply hose has been reconnected before using the
appliance.
The display is not
clear.
The appliance may be in a brightly lit or sunlit area. -
NA-148VB6_English_UK.indb 37 2016-6-13 10:51:20