Operating Instructions

Installation Instructions - 33
Moving and Installing
Installing the anchor bolts
Remove the four cover caps.1.
Insert the anchor bolts into each 2.
anchor bolt hole.
Tighten each bolt with the spanner.3.
Levelling the appliance
On each leg, loosen the plastic nut by 1.
turning it clockwise.
Adjust each foot by turning it 2.
clockwise or anticlockwise.
Use a spirit level to make sure that 3.
the appliance is properly levelled.
Tighten each plastic nut by turning it 4.
anticlockwise.
Caution
Make sure that all plastic nuts are -
tightened securely and the feet are
still bolted to the appliance.
If they are unbolted, the appliance
will move around.
Do NOT put cardboard, wood -
or similar materials under the
appliance to compensate for
unevenness.
Be careful not to destabilize the -
appliance when cleaning the floor.
Plastic nut
Foot
NA-148VB4_English.indb 33 2011-12-26 13:58:22