Operation Manual

- 8 -
1 Open Door.
Put in Food.
Close Door.
The oven lamp will come on.
Oven lamp turns off.
2 Select
Power Level.
Press MICROWAVE Pad to
select correct power.
eg. HIGH––see below.
3 Select Time. Press NUMBER Pads to set a
heating time.
eg. 4 min. 30 secs.
Press Pads 4, 3 and 0.
Max time you can set:
HIGH 15 mins
Other 60 mins
4 Press
START Pad.
Display window will count
down time.
The cooling fan will be turned
on.
At end of heating programme,
oven beeps
3 times, and “0” flashes in
window until door is opened.
Remove food.
Display window will indicate
the previous programme.
5 Open Door.
End of Programme
Open Door
INFORMATION
ACTION
DISPLAY
ACCESSORIES TO USE
Do not use the Wire Rack Shelf or
Ceramic Insulating Tray when
cooking by MICROWAVE.
Once
Twice
3 Times
4 Times
5 Times
6 Times
1350
650
420
240
180
0
PRESS
WATTS
Operating your Oven as a Microwave
HIGH
MEDIUM
LOW
SIMMER
DEFROST
STAND
POWER LEVEL
•
Multi-Stage (Sequential) Heating
The oven can be programmed with up to 3 different stages to operate in sequence.
These can be MICROWAVE, GRILL, CONVECTION, FAN GRILL , GRILL CONVECTION or
COMBINATION functions. If a required heating time is greater than 15 minutes on HIGH power, use
2 stage programming.
For 2 stage programming:
Follow steps 1-3 then enter the next heating programme, and press START Pad.
For 3 stage programming:
Follow 2 stage programming and enter a 3rd heating programme before
pressing START Pad.
•
Hot Surfaces
Take great care when removing hot food. Use oven gloves.
•
Repeat Feature
See page 5.