User Manual

– 12 –
Control Panel
Start Pad
One press allows oven to
begin functioning. If door is
opened or Stop/Reset pad
is pressed once during oven
operation, Start pad must
again be pressed to restart
oven.
Display Window
(Pg. 13)
Stop/Reset Pad
Before cooking: One press
clears all your instructions.
During cooking: One press
temporarily stops the cooking
process. Another press cancels
all your instructions and colon
or time of day appears in the
display window.
* The control panel of
NN-ST65JW/NN-ST67JS/
NN-ST69JS
have the same
key layout.
Micro Power Pad
(Pg. 15-16)
Sensor Reheat Pad
(Pg. 19)
Time Pads
Add Time Pad
(Pg. 18)
Beverage Pad
(Pg. 20)
Turbo Defrost Pad
(Pg. 16)
Timer/Clock Pad
(Pg. 14, 27)
More/Less/Weight Pads
(Pg. 16, 20, 25)
More/Less setting:
To adjust the cooking time for
Auto/Sensor programs.
Weight setting:
To select the serving/weight for
Turbo Defrost feature and Auto
programs.
Quick 30 Pad
(Pg. 18)
Melt & Soften Pad
(Pg. 25)
Sensor Cook Pads
(Pg. 21-24)
Note
If an operation is set and Start Pad is not pressed, after 6 minutes, the oven will automatically cancel
the operation. The display will revert back to clock or colon mode.
Beep Sound
When a pad is pressed correctly, a beep sound will be heard. If a pad is pressed and no beep is heard,
the unit does not or cannot accept the instruction. The oven will beep twice between programmed
stages. At the end of any complete programme, the oven will beep fi ve times.
F0003CA00QP_OI_07_180507.indd 12 2018/5/8 14:00:55